View Full Version : Cp Pro, metal head Fly bar question
EatMorePizza
11-22-2007, 01:22 AM
Im installing this metal head on my cp pro and Im wondering what will stop the flybar from spinning? Am I missing something? I can stop the flybar from sliding but not spinning. Check out the pic.
http://farm3.static.flickr.com/2043/2054519632_f47eaeab06_o.jpg
Dwntyme
11-22-2007, 01:41 AM
Where did you get that head??? Looks like there is a part missing, ( the paddle control frame)
EatMorePizza
11-22-2007, 09:04 AM
ah your right. I keep starring at it wondering whats it missing. I got this off ebay for cheap (go figure). Where can I get that piece?
Or I should use the stock plastic one instead.
bpd964
11-23-2007, 10:27 AM
Quite a few parts missing.
EatMorePizza
11-23-2007, 10:42 AM
Quite a few parts missing.
Which?
redneckteddy103
11-23-2007, 01:46 PM
a full head will look like the pic below but to awncer your other question you have to file a flat spot on the fly bart to keep it from spinning ..................
EatMorePizza
11-23-2007, 02:58 PM
a full head will look like the pic below but to awncer your other question you have to file a flat spot on the fly bart to keep it from spinning ..................
I saw that head but I think this is like the one I have. It doesnt require all the lower mixing arms.
http://www.microheli.com/mhshop/images/MH-CP002HS3_l.jpg
redneckteddy103
11-24-2007, 03:32 AM
ya maybe but that means you have a bare head and some bucks to get it in flying shape
EatMorePizza
11-24-2007, 10:22 AM
I just got the part. I cant believe I missed that:roll: