Bergen intrepid EB gasser

[miami6]

I would like to know that is the distance from the black tail box to the bearing on the inner part

so i can line it up properly to caut the tail rod the proper length and have the tail blades at a hover pitch position





andres

[lperagallo]

maimi6,

I measured my tail rod and depending how you position your tail servo the following measurements apply.

If you mount your tail servo with the wheel closest to the pod, then the carbon rod is 32 and 3/4 inches.

If you mount the servo with the wheel away from the pod the measurement is 32 inches.

That will give you plenty of adjustment in both ball links.

Lou