Neu 1515 2d in a 600 3d?

[terrabit]

Neu 1515 2d? Has anyone done this? Will it work well or is this a bad idea? Pinion? 8s or 10s? Jazz 55-10-40? Sugestions?

Neu 1515H 2d
1700kv
385 grams
3.2" in length
0.019 ohms resistance

Thanks guys! Almost there!!!

[LITHIUMSTATIC]

That motor will not work in the Logo 500 or 600.

I run the NEU 1912/1Y/H and it kicks ass.:YeaBaby:
Also the Actro 24-4 or 32-3 I hear are bad ass
Plentenberg Orbit 30-12 I hear a lot of good things about it
Tango 45-07 is really good for long flight times but not as powerful as the above.

[Ticidytoc]

Not saying it will not work, but any 15xx series motor will not be in its happy zone with the gearing in the logo.

[Mercuriell]

Neu 1515 2d? Has anyone done this? Will it work well or is this a bad idea? Pinion? 8s or 10s? Jazz 55-10-40? Sugestions?

Neu 1515H 2d
1700kv
385 grams
3.2" in length
0.019 ohms resistance

Thanks guys! Almost there!!!


There's no such motor - do you mean the 2.5D or the 2Y ?

If you mean the 1515/2.5D its kV is 1700 - if you play around with an HS calc (http://www.dacsa.net/heli/Calculator/default.aspx) you will find that at 6S and the lowest pinion available (13t) you will find HS around 2900 which is just too high - to get around target HS 0f 2200 you'd have to go 5S and the current delivery to deliver adequate power would be around 75A which would likely burn your ESC and give you flight time of ~3 mins for a 5000 mAh pack - that in long hand is why it's not suitable !!