Post your charging setup

[Billybuck]

E-Station BC8 Charger for FlightPower 4900's

Accu Cycle Elite for TX, RX, and BEC Batteries

OFNA 18 Amp Power Supply


http://vermontfisherman.com/T-REXHelicopters/images/charging.JPG

[th3tick]

You posted that just to show off your X9303 with stick bling, didn't you! ;)

My charging stuff is too scattered across my desk to take a good picture. Well, I could, but you'd see the mess that is my desk that way :YeaBaby:

John

[bpd964]

As soon as my TP1010/210 combo arrives, I will post mine.. :)

[Pinecone]

No picture but:

Triton Green Dot

Triton2 with Equinox Balancer

2x Cell Pro 4S (4 amp)

Thunder Power 1010C with 210V

MRC 959 - got when I was messing with cars

Duratrax IntelliPeak Mini Pulse

Flight Power V Balancer

Powered by:

2x 7AH gell batteries and Battery Tender 1.25 amp

Mastech 3030 power supply (30 volts, 30 amps variable)

MRC and Duratrax are AC powered.

[istandalone]

mrc superbrain 977 with included power supply. also, just in, DN power lipo/ion charger with duel KP 11.1v 2200mah's. two TP 11.1v 1320's and two electrifly 11.1v 2100mah's. also, vision peak2 nicad/nimh charger with too many nicad/mh cells/packs to count. billybuck, just how much $ is sitting there on your table?

[Billybuck]

You posted that just to show off your X9303 with stick bling, didn't you!


You have a good eye. I haven't really tried them yet in flight but I like the way they feel on the thumbs.

By the way the white sheet you see in front of the power supply is a pack of white sticky dots for numbering the cycles on each battery.

[hurleybt]

Cellpro 4S 4A for my rex lipos

Super Brain 949 for all my NiMh needs, including my DX6. That wall charger was stupid slow.

[RC Accessory]

Bantam e-Station BC-8
Bantam e-Station 301DX. Used mostly for nicads
Pyramid PS46 Power Supply
Bantam e-Station PB-6 Balancer
TME Balancer - Beta tester Not released yet
Litco Alpha 4 - used mostly for nicads and cycling

[SilverFoxCPF]

Schulze isl 6-330d/RS powered by a Mastech HY3010E.

Tom

[Old Sloppy]

TP 1010C and 210V ballancer for me.
Radio Shack 25 amp power supply,

Triton green dot ( two of them)
with 2 converted computer 12 volt power supplies
one for transmitters and another for reciever packs, recharge everything at the same time.

Astro 112DX charger for NiMh cells
with a really old UL listed 15 amp power supply (weighs about 25 lbs.)

then I allso have a 3 cell "black-wall-plug" with a two color LED charger with a blinky.

Harry

[ChasHeliCop]

Hyperion 1210i + 2- LBA10 Balancers, and ProPeak Power Supplies.



http://www.helifreak.com/attachment.php?attachmentid=23878&stc=1&thumb=1&d=1186177884

[th3tick]

OK, here's mine. The only thing missing is the BC6 on the other side of my desk. Oh, and my future Cellpro 10s ;)

John

[Billybuck]

Lot of nice setups here.

[terrabit]

TP1010C x 2
TP210V x 2
Prophet Plus
RipMax Dual Output

[hopntod]

I dont know much but it seems that the 1010-210 is a pretty versatile set.
todd

[Jermo]

Cellpro 4s
Balance Pro 6S
X-Peak 3 Plus GP charger
Astron P/S (forgot amperage but it's > 40A)

All setup in modular style in a carrying case.

[NCrcNut]

Here’s my setup, I went for portability while still charging 2 batteries at once.

[bbagle1]

Polycharge four, deep cycle marine battery, two astro flight blinky's. Nice affordable setup for this college student.

[Mercuriell]

e-Station 902 / TP 1010 / Astroflight 109 / Swallow

e-Station PB6 / TP 210 / FP V-balancer

25A regulated 12 V PSU

[bpd964]

pretty simple and neat but to the point...:)

http://img.photobucket.com/albums/v706/bpd964/chrgsetup.jpg

http://img.photobucket.com/albums/v706/bpd964/chrgsetup2.jpg

[blueviewlaguna]

Fellow Bantam estation 902 users - interested to share experiences with these chargers.