POST your 14MZ & 12Z Setups, Pictures, and Sound Files H

[bathmagic]

does anyone have a 14mz file for a raptor 50 with a 401 in mode 1 ?

no govenor fitted ?

thanks Dale

[Blair]

What are the chances of these programs working for the 12z?

My understanding is if the model name is 8 characters or less it will work?

(Thanks in advance Sapca!).

Blair

[eric_b]

Here are some of my sound files.

You can make your own custom sound files using: http://www.research.att.com/~ttsweb/tts/demo.php

-Eric

[jack2k]

Hello everyone

does someone has the setup for hirobo sceadu 50 evo ( normal and idle-up ) ?

My setup is :

os 50 hyper
gy-401 + 9254
9255 cyclic
3050 gas

regards, Jack

[gtrick90]

Following italian voice files (female) for various conditions (startup,idlup1,idlup2, hold, normal)

Luca

[gtrick90]

Following my setup file for the following models:

- Thunder Tiger Raptor 90 SE with GY 611 and RevLock

- Thunder Tiger Raptor 50 Titan with GY 611 and TJ Pro

- Hirobo Lepton EX with Jazz 80, GY401+9254, Hyperion 3025-10

- Twister 3D Pro with Align 35 ESC, Gy 240

All setups are in mode-1

Luca

Any chance someone has put their Blade CP or CP Pro on their 14MZ and would be willing to share?

Since I'm totally new to helis, I'm lost on my 14. Seems like such a waste!

Any guidance would be greatly apppreciated!

-bob

[wjvail]

Here are a few WAV files I've created. I've included a few for the trainer box. :wink:

Feel free to make suggestions.


Bill Vail

[WilsonFlyer]

Anybody got a setup file for the Blade CP or the T-Rex 450XL and 450SE?

THANKS!

[inkspot1967]

heres one for a blade cp pro

[tmark65]

Hello guys,

I own two old helis BUT I need assistance on how to setup them on my Futaba 14MZ radio (mode2).

Does any fellow have the Trex 450X and the Raptor 30V1 files ?

my Trex is with Hitec 55s and Fut GY240 gyro and the
Raptor an old setup from '99 which was never flown (CSM 2000 gyro).

I appreciate any help ...

Regards :oops:

[giopapy]

Here is my setup, mode 2
for Century Predator Carbon Gasser 26cc
gy611, gv1+9252, S9451.
Trims are inverted.

SA=GOV on/off
SB=AILE/ELEV d/r
SC=GY sens
SD=rudd d/r
SE=GOV 1500/1750/1850
SF=NORM/IDLE-UP
SG=THR HOLD
SH=THR CUT

LD=GOV +/- 50rpm
CD=Audio volume
RD=GY sens +/- 5%

[yttutty]

Hi
I need Jetcopter SX setting. It's not easy to setting up correctly by myself.
Please share your setting.

Thank you :wink:

[gordohigh]

I'm not using my 12z until the spektrum modue comes out, but If anyone gets their trex600 nitro setup, could you please post the file.

I'm using multigov, 401/9254, and 9252's on cyclic, but anything to get me close will work. This will be the first model on this radio and It will help a bunch to look thru the programming for the next setup..

[pilou2]

Here are some of my 14 MZ model settings (mode 1):

Important: I use a tray system with my 14MZ. I reassigned Throttle hold to switch B and the condition switch to C.

First a T-REX 600 set up with a Jazz controller and the standard Align 600L motor.

The second one is a Freya Twister. You will have to set again the different swash mixing compensation for your head as mine really needed a lot of compensation... I use a multigov on it but the throttle curves are set and can be used without it.

Then the third one is a Freya Super II (standard Freya with SSR-VII head) with a Staysee body set for F3C.
I use the throttle mixing (no governor off course) and needle curve. I am experimenting with these needle curves and will probably inactive them shortly.
Everything else is standard setting.


Enjoy! :wink:

[greenflyer]

I do not know who created this but thanks and I am sure you will all agree this has all you need.

[bobog]

Anyone out there with the following setup that they would be willing to share

Futaba 12Z
Raptor 90 3D
4 x 9451's on cyclic and throttle
Futaba GY611 and 9256 tail servo
MultiGov

[MD3DNT]

Anyone have something that would work, or a program that I can mod for the Pred?
Thanks
Ross
hello
i just bought the 12Z and i am looking for a programe for my TREX 600N in mode 1

[DavidH]

Mode 2 program will work. You just have to swap the functions around once you load it. Have a buddy that flies Mode1. I load his models into my tranny and change the functions so I can fly his models. I use Mode 2.

Here is a link

http://www.jkheli.com/14mz/index.htm

It will work in the 12Z. Just download the basic setup for electronic mixing.

David

[MD3DNT]

hello guys
i have a 12Z and i want to set up my trex 600n in this way
i want the gv1 to be on a switch (sf) and when its on i want to go in idle 1&2 using the SE switch (3 position down normal curve with or without gv1) second position idle 1 (with or without gv1) and last postion GV2 with or without GV1

foo the gyro i want sensitivity directly linked to the SE switch normal 32%,Idle 1 30% and Idle 2 at 29%
i was flying in this way using the 9C
is this possible with the 12Z??
thanks for your help

[DavidH]

Yes it is possible to have the idle up switch control the govenor. You set this up in the governor menu in the 12Z.

David

[MD3DNT]

well it seems that i am not used to it becaus i spent 3 hours trying and its not working the way i want it
i must do something wrong

[DavidH]

well it seems that i am not used to it becaus i spent 3 hours trying and its not working the way i want it
i must do something wrong

Oops sorry. I don't use a govenor. So had to go get my radio to look.
Go into the function menu. Scroll down till you see govenor. It will say Null Null next to it.
In the switch column, highlight that Null. Then select the switch you want to control the governor. Make it the same switch that controls the idle up function. You can just leave the trim Null.

David

[1basejump]

Hello all,
Thanks for all the help with some of the modle setups saved me some hours of hair pulling, just need one more, any one out there with a knight 50 3d, Gy 611, Gv-1.

[K27R]

Is there anywhere that tells you how to set up throttle and pitch curves on the 14mz? The files that are posted wont work for me as I am helping someone with 14mz setup a Trex 450 SE. I was helping out today and it is just absolutely FRUSTRATING!! The manual is junk! All I want to do is set up pitch and throttle curves!! I had a Futaba 9C that was simple. The X9303 that is great!! Enough ranting, if someone could walk me through setting up throttle and pitch curves that would be great!

K27R