Redi Heli 515CF blades by Qo-Quick

[mjdee14]

I recieved a set of 515mm CF blades form Redi Heli advertised for the Hurri...

They came with 4mm holes and no spacers.

They apear to be of very good quality and balnced almost perfectly right from the box, nice smooth finish and nice white glossy finish.

Are spacers redily available, or do I drill out the blade holders to 4mm (might weaken the holder?)

Anyone have any experience with these blades or can direct me in the correct direction.

I would really like to try these out and maybe even get another set, they sem so nice.

Mike

[Happy|Harry]

the metal grips are 4mm if that's any use, and there are 3-4mm spacers that come with the stock woodies that you can use with the plastic grips :)

phil

[ukgroucho]

Mike,

I also have a set of these but have not had chance to try them yet. I've been running in some new LiPos and the weather is so bad here right now that all I do is go to the field, fly a couple of packs runing in and get into the car again. It's not tempting to mess around changing blades etc.

I really do want to give them a try - they look very nice. As Phil says the CNC blade grips use bigger bolts than the plastic ones so the blades will fit just fine.