CC Gov mode setting

[Flybar-less]

These are the setting CC reccomended and work well for my 600.
Gov Gain should be 50% max.

Basic:
Soft cutoff
Brake disabled
Gov high, after setting fixed endpoints

Advanced:
Start Power 25
Throttle response low/2
Current limiting insensitive
Gov Gain 40
Spool up speed high/8

[uragano47812]

Yes i have setted mine like you on my Logo500 vstabi. But now i'm using it in fixed endpoints.

But i see that using 1.55 firmware i have to reduce under 30% the gov gain but this on my Trex600 (now sold).

I will try again gov also on my L500 and will see.