Chrisk7
12-08-2007, 11:15 PM
Airframe only no electronics or engine. I had a BME 50cc in it and it flies perfectly. No damage ever.
It has only been in the air around 8 or 10 flights. I just have too many planes and would like to thin the fleet a bit.
It has a virtual pilot and instruments, carbon gear, canister tunnel, fuel tank, quick filler, filter, and all the linkages.
The only thing it will need is an engine, and radio gear.
Here is a copy of the web page on this plane.
"The 30% Yak is Amazing!!!! After the test flight I turned around and let the owner of the company know that I can’t wait for mine!! This plane rolls so axial and does not lose any altitude that one can do some pretty cool rolling aerobatics very low. The blenders were very violent and came out in a perfect inverted spin that was 100% in control. The 50 seemed to be a perfect match for this plane. I don’t think you could put much more engine in because of the size. We will have a 35% Yak out that will take a 100cc engine. But for a plane this size I was amazed at how much it flew just like the bigger models. It was very forgiving in 3d but had the high energy packed behind it. I think this will be one of our biggest sellers. "
Garrett Morrison
Included Hardware:
Fuel tank, aircraft grade aluminum wingtube, aluminum main gear, rubber wheels, tail wheel bracket, aluminum stab tube for removeable stab, control horns, hinges, wheel pants, SAE bolts and nuts, much more.
Specifications:
Wingspan: 87"
Length: 75.5"
Flying Weight: 16lbs
Wing Area: 1411sq.in.
Engine Size: 50cc
CANISTER READY, COWL RING MOUNT, PRE-HINGED, BEST 30% YAK AVAILABLE, FULL PARTS SUPPORT IN STOCK
Email me for more info or pics at ck797838@yahoo.com
Asking $375.00
Shipping will likely cost around $120.00
I would be willing to deliver or meet up to 75 miles from Hermiston, Oregon 97838
It has only been in the air around 8 or 10 flights. I just have too many planes and would like to thin the fleet a bit.
It has a virtual pilot and instruments, carbon gear, canister tunnel, fuel tank, quick filler, filter, and all the linkages.
The only thing it will need is an engine, and radio gear.
Here is a copy of the web page on this plane.
"The 30% Yak is Amazing!!!! After the test flight I turned around and let the owner of the company know that I can’t wait for mine!! This plane rolls so axial and does not lose any altitude that one can do some pretty cool rolling aerobatics very low. The blenders were very violent and came out in a perfect inverted spin that was 100% in control. The 50 seemed to be a perfect match for this plane. I don’t think you could put much more engine in because of the size. We will have a 35% Yak out that will take a 100cc engine. But for a plane this size I was amazed at how much it flew just like the bigger models. It was very forgiving in 3d but had the high energy packed behind it. I think this will be one of our biggest sellers. "
Garrett Morrison
Included Hardware:
Fuel tank, aircraft grade aluminum wingtube, aluminum main gear, rubber wheels, tail wheel bracket, aluminum stab tube for removeable stab, control horns, hinges, wheel pants, SAE bolts and nuts, much more.
Specifications:
Wingspan: 87"
Length: 75.5"
Flying Weight: 16lbs
Wing Area: 1411sq.in.
Engine Size: 50cc
CANISTER READY, COWL RING MOUNT, PRE-HINGED, BEST 30% YAK AVAILABLE, FULL PARTS SUPPORT IN STOCK
Email me for more info or pics at ck797838@yahoo.com
Asking $375.00
Shipping will likely cost around $120.00
I would be willing to deliver or meet up to 75 miles from Hermiston, Oregon 97838