9z and revmax help needed

[inkspot1967]

i have a 9z radio and a new revmax gov and i cant get this thing into the calibrate mode at all ...

i believe i have it all wired right but i dont think i have the radio setup right...

can anyone tell me how i setup my radio correctly

[mevigavant]

go to fcn menu and assign channel 8(aux 2) to switch c. make sure the switch is in the up position when you turn your transmitter on. then turn your heli on and flick the switch 2 times within 3 seconds. it should be back in the up position. you are now in calibration mode. are you geting the sensor to pick up the magnet?
make sure the radio is in normal and the Atv's on Aux 2 are 95/95. also make sure your thrtle curve is a linear line in normal mode. hope this helps.

[inkspot1967]

i did all that and it still doesnt work...and i do pickup the sensor it lites up the 2 top red lites up