GV-1 and 9C

[bembill]

I am setting up my new trex 600n now. And I am going to use Gv-1 on it.

1. Can I set up the throttle curves in the radio like this: Norm 0 31 50 68 85
Idle 1/2 85 68 50 68 85


2. What switc will be best for throttle cut. I can read in the manual "you must move the throttle stick back below the set point before the thr cut function can be reset" My throttle cut is working, but wat is the recomended set point?


Tim-Ole

[MarkD]

Top rear right hand Momentary Switch (Trainer switch) to shut of the engine. The shorter one in front I used for THR Hold. I set mine up so that it would only cut at idle although some like it to cut across the whole stick range so dead autos can be performed