A Few Questions (servos, gyro)

[loewermx]

Well, I am finally getting a Spectra :cool: Spectra G, Tempest Head, Hanson 26 Pro, Hatori Muffler. Should be SWEET!!!!!!

I am wondering if anyone is using the 9255 servo for the CCPM? Would it be better than the 9252?

Also, I have heard that the GY401 can't handle the load of a gasser, I would like to get some opinions on this. What about the GY502?

Thanks in Advance guys!

Scott

[Joe Ubaldo]

Sounds like you picked up a sweet setup Scott. I know you're gonna enjoy it. Have fun!

Joe

[WillJames]

Never tried a 502, but the 601 is great on a Spectra. John has also had great luck with the JR 500T. Be careful running ANY 26 at 7.15 ratio. The 26 does not seem to like that ratio very well, and you may experience some high frequency vibrations. You will not hear or maybe even see the vibs, but you will quickly start to find things loose on your heli. Very few 26's don't have that problem and even our prototype TRM 26 was not happy at 7.15. We found that at lower ratios even 6.9 the 26 is MUCH better, although we are still testing. The 231 on the other hand seems VERY happy at 7.15. Get some 110 tail blades and the tail will hold a lot better.

[hercdriver7777]

The Hanson 3D Max 260 is fine at 7.15.