Mini Titan E325

[Stimey131]

I knew to flying helis and I've been reading everything I can find on the how to set-up this thing. I've watched all of Finless Bob's vedieos and they were great. I learned the so much from them. My gear stock heli and motor with 3 HS-65 servos and a GY 401 w/ a 9250 for the tail control. Also a Align 35amp esc w/a 6v bec and a 5.1v step down for the tail servo. Well I've put my MT togerther got everything setup and went out to try and hover, but when it starts to get lite on the skids it just spins in as circle. So i went in and made sure the gyro and servo were all moving the correct direction and they seem to be. So I tried to fly it again and it wants to spin in a circle, but I tied to manuly compensate by moving the tail with mt TX and then it just started spinning the other direction. Any help would be appreciated.

[kingman_14]

http://helihobby.com/html/min_titan_rcheli.html

I'm looking at that. Is it a good deal? (the Electric Mini Raptor Titan 3D Combo Pack) the first one on the list

[chuckk]

i wouldn't buy that. doesnt seem like a good deal to me. i wouldn't want that eflite battery and i dunno why but they include the stock esc and also give you a phoenix 45 esc. check ultimatehobbies.com and you'll get a better deal.

[dynodude]

I knew to flying helis and I've been reading everything I can find on the how to set-up this thing. I've watched all of Finless Bob's vedieos and they were great. I learned the so much from them. My gear stock heli and motor with 3 HS-65 servos and a GY 401 w/ a 9250 for the tail control. Also a Align 35amp esc w/a 6v bec and a 5.1v step down for the tail servo. Well I've put my MT togerther got everything setup and went out to try and hover, but when it starts to get lite on the skids it just spins in as circle. So i went in and made sure the gyro and servo were all moving the correct direction and they seem to be. So I tried to fly it again and it wants to spin in a circle, but I tied to manuly compensate by moving the tail with mt TX and then it just started spinning the other direction. Any help would be appreciated.
Post this as a seperate thread and you will get more results.:wink:

[cmb2003svt]

Stimey131,
On your 401 just reverse your servo. Mine did the same thing. I thought i wasn't in HH but it was the Gyro servo direction not me flippin the wrong switch,.

[Crashalot]

I have an E325 too you really need the electrics I fly mine with a Hacker A-20 , Castle phoenix 35 A ESC , 3 HS 65 MG servos and a Futaba s9250 digital servo on a 401 gyro. I made two other mods I went to the metal tail rotor drive and use Align T rex 450 blades. The machine is a beast on a 17T pinion gear.