Can someone help me?

[wareck51]

Hi Ihave just buy an TREX600Npro
I have an t9chp (ff9) futaba radio.
Can you explain how I must tune my radio?

(Swash plate type,and tips for tuning)

And if you can give me the throtle and pitch curve I must put in it

thanks a lot

[brgsstm]

Im not familiar with that radio but u need to use the 120 swash type:thumbup:

[OHIOBOWHUNTER]

I'm using the 9chp too, swash sr-3 ,turn OFF ALL mixes in menu's. my set up is pitch linear ,throttle 100,65,55,65,100 on all three idle ups, I'm not sure if I will keep the throttle curves yet as I only have 8 tanks through it and haven't experimented yet . good luck

[aevans692]

I'm using the 9chp too, swash sr-3 ,turn OFF ALL mixes in menu's. my set up is pitch linear ,throttle 100,65,55,65,100 on all three idle ups, I'm not sure if I will keep the throttle curves yet as I only have 8 tanks through it and haven't experimented yet . good luck

You would not want those curves on all three idle up how do you mean to start the heli without it spooling up in your hand, also how would you stop it???


Idle1 for example needs to start from 0

[brgsstm]

Idle1 for example needs to start from 0

do you mean normal?

[aevans692]

yeah in diff radios it is called different

futaba is norm, idle 1 , 2

Jr , spectrum , is norm , stunt1,2

but which ever radio you use, you need to start one of your curves with "0" that is normally "norm"

for example 0 , 25, 50, 75, 100 with a curve like that you are able to start your heli up safely with out it spooling up in your hand , starting your heli at mid throt cloud be dangerous....

[brgsstm]

yeah in diff radios it is called different

futaba idle 1 , 2 so on

Jr , spectrum , is norm , stunt1,2

but which ever radio you use, you need to start one of your curves with "0" that is normally "norm"

for example 0 , 25, 50, 75, 100 with a curve like that you are able to start your heli up safely with out it spooling up in your hand , starting your heli at mid throt cloud be dangerous....


I always thought all radios had normal and idle1/stunt1 and then idle2/stunt2 if they have 2 idles. But i agree on never having a flight mode without a 0 start! hell that would be dodgy!

[aevans692]

think your right , has been a while since I have had a futaba..

[brgsstm]

think your right , has been a while since I have had a futaba..

same here, never looked back since the DX7:YeaBaby:

[aevans692]

same as, what were those things called frequency pins, think I heard about them once... or did I dream it...lol...

[OHIOBOWHUNTER]

You would not want those curves on all three idle up how do you mean to start the heli without it spooling up in your hand, also how would you stop it???


Idle1 for example needs to start from 0 I never said to start it in IDLE UP ! the heli is started in normal mode !

[brgsstm]

I never said to start it in IDLE UP ! the heli is started in normal mode !


There was just a little confusion between the modes you were running thats all:thumbup:

[aevans692]

,throttle 100,65,55,65,100 on all three idle ups, I'm not sure if I will keep the throttle curves yet as I only have 8 tanks through it


You stated that you run that curve on all three idle ups. Do you have four flight modes on your radio ??

my old futaba , Jr only had three and my Dx7 only has three... If I found it a bit bewildering in what you meant, then someone who is just joining this hobby would too, I just didn't want some one to hurt them self as accidents do happen..

[OHIOBOWHUNTER]

Yes the 9chp has 4 modes on it and the original poster did not state that they were a newbie nor was this post it the newbie section . sorry I'm not a psychic !:wow2:

[I want it]

Who the heck would start there heli in idle up anyways..........................what the heck thats why we have throttle hold hmmmm i dont think the guy that told this other guy was telling him to start in idle up. Seems like some people make a big thing outa of nothing somtimes. good luck guys

[brgsstm]

Who the heck would start there heli in idle up anyways..........................what the heck thats why we have throttle hold hmmmm i dont think the guy that told this other guy was telling him to start in idle up. Seems like some people make a big thing outa of nothing somtimes. good luck guys


What has throttle hold got to do with starting in idle up???

[I want it]

when my throttle hold is on doesnt matter what mode your in the blades arent going to turn at all no spool up no nothing just sits there running. But still I would think that you would check your stuff out before firing up wouldnt you. That would be a big surprise to fire up in idle up.

[invertmast]

when my throttle hold is on doesnt matter what mode your in the blades arent going to turn at all no spool up no nothing just sits there running. But still I would think that you would check your stuff out before firing up wouldnt you. That would be a big surprise to fire up in idle up.

Newbs dont "know" this and some might start the heli in normal mode w/ throttle hold off.. yes i've seen people do this and had to correct them on it

[I want it]

Well that is very true we all make a mistake here and there. I know I have there called crashes hahahaha, Have not put the 600 yet but I'm sure it will happen soon enough.:YeaBaby: