PDA

View Full Version : Fury Expert and MA open Tail Gear


LYNNJ
04-21-2005, 12:57 PM
Anybody that has an expert and is wanting to upgrade to an open tail gear you need to upgrade to the Extreme yoke. You will need the following part numbers:
1 120-14 fork
2 0859-16 ball bearinged figure eights
2 0049 screws
1 0015

The yoke on the expert is too wide and hits the corner of the gear box and the pivot.

heliart
04-24-2005, 07:15 PM
I raised this ages ago with MA.

You can use the standard yoke, it's a very close fit and you have to limit the throw slightly, and take a little bit of plastic off the yoke itself, but it fits fine and does not effect tail performance at all.

DavidH
04-25-2005, 10:37 AM
The Extreme yoke allows the tail blades to be at 10 degrees right pitch when the slider is centered.

The other yoke that comes on the expert and some more MA helis does not allow the slider to be centered and have pitch in the blades to the right.

David