Khrome
12-18-2007, 04:58 PM
Hi Guys,
Got the RC heli bug about 4 months ago when a mate of mine showed me his Esky Lama. So I decided to join him and went out and I bought a HBKII to learn on, as well as G3.5 to make crashes a little less expensive. :) Any found this awesome website called HeliFreak and have learned heaps from all you guys, especially Finless Bob, your videos are excellent! :noteworthy Anyway enough sucking up. After learning how to hover and do basic circuits on the Sim and the HBKII and spending every night on this forum, I've decided to upgrade to a T-Rex 600E CF because I've been reading that they are actually easier to learn on as they are more stable. Now after a week or so of building (thanks again to Bob and his Vids) I'm at the stage of setting up my Gyro and servo (GY611 and BLS251). Now here's my problem (I know, took long enough to get here! ) It looks like when I power up the electrics the BLS251 servo isn't centering because when I move the rudder stick the servo arm moves further to the left then it does to the right, (I'm using the Dx7) I have everything set to neutral, the gain on the GY611 to Nor%100 and gain on the Dx7 to %50. The servo arm stops moving to the right before the Dx7 does but to the left is perfect. Any ideas on how to fix this? I hope I've been clear enough, and very sorry about the massive read. Thanks Guys.:thumbs-up2:
Got the RC heli bug about 4 months ago when a mate of mine showed me his Esky Lama. So I decided to join him and went out and I bought a HBKII to learn on, as well as G3.5 to make crashes a little less expensive. :) Any found this awesome website called HeliFreak and have learned heaps from all you guys, especially Finless Bob, your videos are excellent! :noteworthy Anyway enough sucking up. After learning how to hover and do basic circuits on the Sim and the HBKII and spending every night on this forum, I've decided to upgrade to a T-Rex 600E CF because I've been reading that they are actually easier to learn on as they are more stable. Now after a week or so of building (thanks again to Bob and his Vids) I'm at the stage of setting up my Gyro and servo (GY611 and BLS251). Now here's my problem (I know, took long enough to get here! ) It looks like when I power up the electrics the BLS251 servo isn't centering because when I move the rudder stick the servo arm moves further to the left then it does to the right, (I'm using the Dx7) I have everything set to neutral, the gain on the GY611 to Nor%100 and gain on the Dx7 to %50. The servo arm stops moving to the right before the Dx7 does but to the left is perfect. Any ideas on how to fix this? I hope I've been clear enough, and very sorry about the massive read. Thanks Guys.:thumbs-up2: