HDX 500SE servo buzzing

[juneebear]

Okay. I got all set up on my HDX 500 SE. I got HS 81MG on cyclics. The only problem i have right now is buzzing sounds coming from my cyclic servos. I already check all my links and cannot find any binding whatsoever. can anybody please help me solve this problem.

[SteveL]

Do you have the main blades on it. If you have the main blades on it and they are not straight out they can create a load on the cyclic servos

[campking]

Sorry double post!!!

[campking]

I've got the same problem, no binding and buzzing servos. Head looks like it is set up properly. Any help will be appreciated.:mad::bawl

[juneebear]

Campking,

I thought it was only me who have this problem. Once again I double check everything to make sure I did not miss anything. Set up is perfect all links no binding but still cyclic servos are buzzing.

[Rotorworkz]

Any tight ball links you should be able to grab each link segment and twist freely (not sloppy) tight ball links can put a bind on servos

[John Heli]

I had the same problem, even damaged one servo: I used Bobs guide to loosen the bindings a little and everything is going smooth since.