eurylokhos
12-19-2007, 09:13 PM
My 600e is up for sale. Great heli, never been crashed, I'm just scaling back. Heli has approximately 50 flights on it, and is in perfect shape. The Neu motor provides plenty of power for hard 3d for 5 and a half minutes, it is more powerful than a 50 glow heli. Lots of fun, and very impressive, none of the components are stressed, it always comes down from a flight with the battery, ESC and motor just a little warm, it's a great setup. This is the smoothest heli you'll ever see, not a single vibe or shake in it, it's as nice as they get. I'll offer it up in a couple configs.
600e CF
Align 75 amp ESC
Neu 1515/2.5D/F w/Revco pinion
Castle Creations BEC
Futaba 9204 servos on cyclic
JR 500T gyro with 8700G servo
Metal blade grips
Head Button
Thrust bearing tail upgrade
V Paddles
Align CF Tails
Align 600N landing gear
Align 600L motor, stock grips, and stock tail included included as well
Hirobo Grey 600mm FG blades
No canopy, No RX
For the above stuff, I think $1000 is fair. Other things you can add on:
Custom canopy and NHP blades painted to match (these are not perfect, they are both done by me, the pin striping on the canopy isn't flat along the curve on the nose, but it's close) - $40 for the canopy, $60 for the blades. To be honest I don't really want to sell these, I'd be happy putting them on my Evo.
Lipos - I have 3 Air Thunder 6s 5000 Packs and 1 TP Extreme V2 6s 5000 pack. 2 of the ATs have 5 cycles, and one has 7 cycles, the TP V2 is a warranty replacement from TP, and is still in the break in with 4 cycles on it. All packs are in perfect shape, have not been abused and make great power. With the heli, I'd sell the packs for $200 a piece, and for an additional $40, I'd include the case shown in the pic, it's a $100 case that holds the lipos and transmitter, and on the bottom layer there is a spot for 2 1010c chargers and balancers, a 12v computer power supply, as well as some tools.
Charger - I have 1 TP 1010c 210V combo that I can include as well for an additional $225. Chargers don't get any better than this.
If someone wants it all except the canopy and blades, I'd do the whole thing for $1950 shipped, and you'd be up and running with a top of the line T-Rex 600 setup. I can take a USPS Money Order, cash or Paypal for payemnt, however, since it is so much, I'd want to split the Paypal fees with you. If the buyer uses Paypal, I will only ship to a confirmed address.
I'm not going to split it up unless someone buys the airframe first. I've got a ton of good feedback on RR, RC Groups, and RCU, as well as eBay if you want to look me up.
600e CF
Align 75 amp ESC
Neu 1515/2.5D/F w/Revco pinion
Castle Creations BEC
Futaba 9204 servos on cyclic
JR 500T gyro with 8700G servo
Metal blade grips
Head Button
Thrust bearing tail upgrade
V Paddles
Align CF Tails
Align 600N landing gear
Align 600L motor, stock grips, and stock tail included included as well
Hirobo Grey 600mm FG blades
No canopy, No RX
For the above stuff, I think $1000 is fair. Other things you can add on:
Custom canopy and NHP blades painted to match (these are not perfect, they are both done by me, the pin striping on the canopy isn't flat along the curve on the nose, but it's close) - $40 for the canopy, $60 for the blades. To be honest I don't really want to sell these, I'd be happy putting them on my Evo.
Lipos - I have 3 Air Thunder 6s 5000 Packs and 1 TP Extreme V2 6s 5000 pack. 2 of the ATs have 5 cycles, and one has 7 cycles, the TP V2 is a warranty replacement from TP, and is still in the break in with 4 cycles on it. All packs are in perfect shape, have not been abused and make great power. With the heli, I'd sell the packs for $200 a piece, and for an additional $40, I'd include the case shown in the pic, it's a $100 case that holds the lipos and transmitter, and on the bottom layer there is a spot for 2 1010c chargers and balancers, a 12v computer power supply, as well as some tools.
Charger - I have 1 TP 1010c 210V combo that I can include as well for an additional $225. Chargers don't get any better than this.
If someone wants it all except the canopy and blades, I'd do the whole thing for $1950 shipped, and you'd be up and running with a top of the line T-Rex 600 setup. I can take a USPS Money Order, cash or Paypal for payemnt, however, since it is so much, I'd want to split the Paypal fees with you. If the buyer uses Paypal, I will only ship to a confirmed address.
I'm not going to split it up unless someone buys the airframe first. I've got a ton of good feedback on RR, RC Groups, and RCU, as well as eBay if you want to look me up.