Logo 600 3D and V-Bar Rotor Head

[-Richard-]

Can someone please tell me why the blade grips on the V-Bar rotor head are "upside down" with the nut on the top, just seems strange to me that the other Logo main rotor heads (and every other heli I know) the bolt to hold the main blades into the blade grips goes in from the top, but on the V-Bar it comes in from the bottom? looks ugly too.
Cheers
Richard

[Ticidytoc]

Mine are identical top and bottom and my grips dont say Mikado on them. I'm not sure if this was a batch that ran this way or if they change them to all be like this.

[-Richard-]

Hmmm, thats strange, mine is similar to the pic but this also shows the nut in the top.
http://www.helifreak.com/attachment.php?attachmentid=33396&stc=1&d=1198212684

[Ticidytoc]

Not really sure on this one, but I run my bolt from the top and nut is on bottom. Once installed you hardly notice this. The way the bird flies sure makes up for the grips. ;)

[Taipan]

It's so you can flip the grips for a different set-up. It's a lot easier to do up bolts from the top than underneath! ;)