Lets start with the best heli build

[brunsflyer]

Ok peeps the best heli setup build with top of the line parts with price break-downs...I wanna know what peeps are spending for a 600N Pro.

:bawl I'm broke!!!!

[aussiemick]

$740 Modefos ebay shop
Trex600NPro
Align muffler
2in1 regulator with battery
Align 600D CF blades

$400 Wattusuprc
4 HS6975
Extra TT bearings
2X 2200 Lipo

$350 Takeoffandland
Logictech LT6100T&6100G
Fuel pump
Fuel Filter
K&S Kinkless clunk line
Glow plug driver

$200 RCWarehouse
GV-1
Header tank
Fuel bottle
Fuel line

$60 King Kong Hobbies
Minimax starter

edit
I had a R77S Rx that I pulled out of a crashed glider (ouch) figure in about an extra $90
end edit

$1750 all up! Shh don't tell the wife.

So far everything (except the Baseloaded antanae that caused a crash and has been removed) is working perfectly.

Mick

[invertmast]

600N Pro-white canopy
Upgraded swash and washout assembly
metal blade grips
metal tail pitch slider
metal TR belcrank
metal fan
NHP 600mm razor pro blades
align frame stiffners
align 2 n 1 w/ battery
4- Fut. 9252's
GY611 combo
OS50 hyper
align pipe
Aerospire Multigov

$1700 out the door.

[fiveoboy01]

600N Pro, White canopy, - 495
Metal Grips - 49.95
Align metal fan - 19.95
O.S. Hyper - 189.95
Hitec HS-6965 servo X3 x 84.95 = 254.85
JR G770T/8900G Gyro/Servo combo - 259.99
Futaba S3155 throttle servo - 49.95
S3155 carbon adapter plate - 6.95
Fuel tubing - 2.99
Align pipe - 78.95
Zeal Tape - 11.99
Raptor 90 clutch liner - 6.99
Braided wire loom kits - 15.00
Sullivan head-loc remote glow adapter 7.00
Model Avionics RevMax limiter - 79.95
Fromeco Arizona Regulator - 65.00
Fromeco 2-cell li ions 30.00x2

Roughly 1650.00

[aevans692]

not in any order....

600nitro pro, red ,
os50 hyper
align muffler
quick uk header tank
JR DS8717
S9254 tail servo
sparten gyro
Alu blade holders
Alu fun
futaba Gv-1
Kasama tail blade grips
SS pitch slider
Cy Radix blades (top and rear)
AR7000 Rx
align 2 in 1
carbon f frame braces
front gyro mount with stiffener

Thats about it I think .... have her in bits at the mo as I stripped a tail gear, only touched a bit of long grass .lol..

[Pinecone]

$740 Modefos ebay shop
Trex600NPro
Align muffler
2in1 regulator with battery
Align 600D CF blades


Do you have a link?

[Y@nkee]

600nitro pro
Full alu rotor head+ new swash/washout
Align carbon paddles
Alu frame bearingblocks
Alu tail pitchslider+alu tail control arm
Alu elevator/aileron levers
Align gyromount
Align frame braces
JG´s 600 Nitro canopy mount
Align alu fan
Hyper 50
Align muffler
Radix main and tail blades
3x 8717 +align servohorns
Gy611/9256
9252 throttle servo
Align 2in1
Align gov
Align stepdown for the tail servo

Most of it from Rchover

Need a lipo and a reciver and i should be good to go
Only problem with this heli? Probably the pilot :D

$? that we dont talk about:YeaBaby:

[aussiemick]

Do you have a link?
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=110199194429&ru=http%3A%2F%2Fsearch.ebay.com.au%3A80%2Fsearch%2 Fsearch.dll%3Ffrom%3DR40%26_trksid%3Dm37%26satitle %3D110199194429%26category0%3D%26fvi%3D1

Here is Modefo's EBay shop
http://stores.ebay.com.au/Modefos-RC-Inc

If you hurry you can get the same deal but without blades for $699, I have watched a fair few of these auctions and a bid of $699 maybe $709 will generally win it. :)

Modefo's was great to deal with.

MIck

[Pinecone]

OK, that's why I couldn't find it. It is on teh Australian site and thei user names is missing the S.

Thanks.

[aussiemick]

it is only that I was logged in that it shows up as an australian site.

Modefo's is definately American


Mick