blade cx servo problem

[sizzar link45th]

ive had my blade cx for a year and a half . upgraded to aluminum swashplate and upper and lower M/R grips and aluminum battery tray with a shorter fly bar . thow i havent had the chance to feel it yet in flight due to me red X ing it because of a weard servo malfunction . my problem , when i switch servo plugs in my 4 in 1 C U allways one servo does not advance my shwash plate to the foward flight position . ferthermore my transmiters R/H stick controle has shifted all controls counterclockwise a qurter i had changed to a spectrum setup but that didnt make the par. is there a simple solution? im new to the forum and could use all the help i can get on this bird.

[carlo_the_wonder_frog]

If you notice the swashplate does not move in the direction that the stick is moving...this is completely normal it looks like it is off by 30 degrees or so, but it flies perfectly.

[sizzar link45th]

when i flew it out of the box , when i advanced my blade cx controls on the left stick the 2 servos worked in unisum and both advanced shwashpate forward , i still supect ther is a fault . now forward on my blade cx control is full up left corner on right stick. this cant be right . and i got the tolit bowl effect.

[sizzar link45th]

my forward flight is in the right stick top let corner of the control