rond
12-29-2007, 06:25 AM
SOLD
I have for sale a very sweet fully blinged out Hurricane 550 w/ radio.
It Includes: 1100kv motor, Align 75amp ESC, 3xDS821 Digital servos, RCP 500mm Carbon Blades (+2 extra sets NIP), Castle Creations CC-BEC, Metal Head Block, Metal Blade Grips, Many spare parts (many of them NIP) see below, and Futaba 9C with 149 PCM RX (Ch 48). I've been building helis for 13 years, and I completely disassembled the frames, locktited everything, and upgraded to Rocket City link ends everywhere the stock ends were too short, etc. The heli is ready to fly, just add your gyro/tail servo(had to steal the 401 out of this one for another heli) and batts. Has excellent 3D power and includes stock motor and controller if you are looking for long flighttimes for learning with the option to run the big motor for hard 3D.
I ran into a killer deal that I just couldn't pass up on another heli setup...so now this one has to go quick before the wife kills me!
**PRICE DROP...GOTTA MOVE THIS BIRD
Includes the following, plus tx and rx, for $550.00 Shipped in the CONUS:**
Kit...250
Motor...60
ESC...75
RCP Carbon Fiber 500mm Blades (x3)...90
Castle BEC...22
Servos DS-821 Spektrum w/Large Whls...45
Canopy...12
Blade Grips--Aluminum...59
Head Block--Aluminum...16
Revco--68 Tooth Machined Gear...14
Revco--Machined Second Main Gear...14
Revco Pinion--21 Tooth...5
Revco Pinion--22 Tooth...5
Pinion--16 Tooth...5
Gear--42 Tooth...4
Gear--61 Tooth...4
Tail Gear...4
Motor Mount--3rd Bearing...15
1st Gear Shaft (Long)...3
Mainshafts...6
Tail Fin--CNC...7
Tail Servo Mount-CNC Delrin...10
Skids...10
Aluminum Elevator Lever...13
Short Belt...8
Short Boom...5
Seesaw 4
Raptor 50 Tail Blades...5
Rocket City Link Ends...4
X-Cell 3D Paddles...8
Total Approx. (not including TX and RX)...780
Thanks!
Ron
I have for sale a very sweet fully blinged out Hurricane 550 w/ radio.
It Includes: 1100kv motor, Align 75amp ESC, 3xDS821 Digital servos, RCP 500mm Carbon Blades (+2 extra sets NIP), Castle Creations CC-BEC, Metal Head Block, Metal Blade Grips, Many spare parts (many of them NIP) see below, and Futaba 9C with 149 PCM RX (Ch 48). I've been building helis for 13 years, and I completely disassembled the frames, locktited everything, and upgraded to Rocket City link ends everywhere the stock ends were too short, etc. The heli is ready to fly, just add your gyro/tail servo(had to steal the 401 out of this one for another heli) and batts. Has excellent 3D power and includes stock motor and controller if you are looking for long flighttimes for learning with the option to run the big motor for hard 3D.
I ran into a killer deal that I just couldn't pass up on another heli setup...so now this one has to go quick before the wife kills me!
**PRICE DROP...GOTTA MOVE THIS BIRD
Includes the following, plus tx and rx, for $550.00 Shipped in the CONUS:**
Kit...250
Motor...60
ESC...75
RCP Carbon Fiber 500mm Blades (x3)...90
Castle BEC...22
Servos DS-821 Spektrum w/Large Whls...45
Canopy...12
Blade Grips--Aluminum...59
Head Block--Aluminum...16
Revco--68 Tooth Machined Gear...14
Revco--Machined Second Main Gear...14
Revco Pinion--21 Tooth...5
Revco Pinion--22 Tooth...5
Pinion--16 Tooth...5
Gear--42 Tooth...4
Gear--61 Tooth...4
Tail Gear...4
Motor Mount--3rd Bearing...15
1st Gear Shaft (Long)...3
Mainshafts...6
Tail Fin--CNC...7
Tail Servo Mount-CNC Delrin...10
Skids...10
Aluminum Elevator Lever...13
Short Belt...8
Short Boom...5
Seesaw 4
Raptor 50 Tail Blades...5
Rocket City Link Ends...4
X-Cell 3D Paddles...8
Total Approx. (not including TX and RX)...780
Thanks!
Ron