611 gy Servo

[Black hawk Down]

Rate up avc up 50%
down Nor 50%

When Flipping switch from rate up to rate down mode, Gyro is still holding, Prior no gyro hold.
any Thoughts?

also, in Rate up avc mode, servo is creeping forward and giving me tail wag.
when I flip to down mode, no tail wag, but gyro is holding and shouldnt be.

[DavidH]

The GY gyros hold very well in Normal mode. By flipping the switch all your doing is changing from AVCS mode to Normal Rate mode and vice versa.
The servo creeping in AVCS mode is because a trim is being induced.
Flip the switch 3 times real fast between AVCS mode and Normal mode. Then end up in AVCS mode. This will tell the gyro to have the same neutral in both modes. This should stop the creeping in AVCS mode.

David