Faulty AR9000 --- anyone had this problem?

[HeliSat]

Hey all,

I have an interesting problem with my AR9000. I have it installed in my trex600n. Whenever I pull positive pitch and right aileron, the throttle servo moves to the opposite side .. eg throttle zero and engine cuts out. As soon as I let go of the sticks the throttle servo comes good again.

I tried another receiver and everything works fine .. so most likely a problem with the receiver. Just wondering if anyone else seen this issue? I think the early AR6100 had a fault like this from memory??

On the lighter side, was good auto practice...

I have contacted Spektrum, I will see what they say.

[big-al]

check to make sure you don't have throttle mixed to cyclic in a mix. if you do on purpose, check your values and make sure their correct.

if not, keep us informed, may be a bug

[HeliSat]

Initially I had thought of that ... but checked all the mixing and found nothing. I can also see the channel monitor on the TX doesn't show it happening either.

Finally I swapped the RX and problem solved. Faulty AR9000.

I contacted Spektrum ... they want me to send it in for analysis. Hopefully its just a one-off fault.