Anyone using 4s 2100 FP Evolite on MT?

[uragano47812]

I have got MT with Z-power Z10A-3300 running on 1500mah 20C 4s Kokams. (one pack dead...)

I'm searching for a FP pack 4s and i see that 1800mah 25C 4s has the same weight as 2100 Evolite 4s so i think this is a good pack for MT.

Does anyone tried them?

Where can i find 2 packs? I can't find them...

[LITHIUMSTATIC]

I run 4s 25C 1800 Lipos & 4s EVO Lite 2500. Very good results with both.

The EVOLite 2500 is heavier but doesn't effect flying performance much for the sport flyer. Probly not the best thing for hardcore 3D but gives real long run times for the rest of us. I have one 4s EVO Lite 2500 with 3 cycles on it if your intersted.

[uragano47812]

Finally i have ordered FP 4s 2100mah.

Thanks

[LITHIUMSTATIC]

Your going to love it!!:thumbup:

[ghtracey]

While we're on the topic of 4S...

Has anyone tried the stock motor and ESC with a 15 tooth on 4S? I was considering giving it a go, about to order up some batts and thought I may want to try it out. Most posts I've seen though are form people using aftermarket ESC's and motors.

[uragano47812]

15 tooth? Is too much you can run it with 11T. The motor is a 3500kv. I run mine with 15T on 3s on my zpower Z10A-3300 that is 3300kv with a ton of power.

If you try the 4s probably the internal BEC on stock ESC is fine but i recomend to you to use an external BEC for longer flights.

My stock ESC was hot on 3s with internal BEC but when i switched to Medusa BEC the ESC is ever cold or barely warm.

[ghtracey]

Yeah, that's what I get for thinking in the morning... I meant 10 tooth, or I guess 11 tooth if I want more headspeed.

I would definately not use the internal BEC for any 4S application. How does the Ripper OBL handle 4S? Anyone tried?