Pete Niotis
05-02-2005, 12:57 AM
I have helped quite a few people lately with this topic and decided to put up a post in case some of you guys have been scratching your heads with throttle curve setup. :cool:
To have adjustable points in your throttle curve you must select either "line" or "spline" in the throttle curve selection screen.
Once you have selected the proper throttle curve you will then be able to see these two buttons << and >> in the lower right hand corner of your screen. Use << and >> to navigate/highlite from point to point.
To remove a point you must have that point highlited or selected then press the rate button which then brings up a delete button at the right part of the screen. Simply press the delete button and the selected point will be deleted.
To add a point you must move your throttle stick which moves the vertical line on the screen to your desired position, then press the "Point" button and a "Move" button will now appear to the right side of the screen. Press the "Move button and an outline of a point will appear where you positioned your throttle stick, then simply press the "Rate" button and you will have completed adding the point.
To adjust the rate of any given point you must select the point, then press the "Rate" button and then use the up or down arrows to the right of the screen to adjust the point's rate. You can also use the double up and down arrows for larger increment adjustments.
All this seems a little confusing and might seem overly complicated but once you do it a few times you can actually start making custom curves in a flash.
To have adjustable points in your throttle curve you must select either "line" or "spline" in the throttle curve selection screen.
Once you have selected the proper throttle curve you will then be able to see these two buttons << and >> in the lower right hand corner of your screen. Use << and >> to navigate/highlite from point to point.
To remove a point you must have that point highlited or selected then press the rate button which then brings up a delete button at the right part of the screen. Simply press the delete button and the selected point will be deleted.
To add a point you must move your throttle stick which moves the vertical line on the screen to your desired position, then press the "Point" button and a "Move" button will now appear to the right side of the screen. Press the "Move button and an outline of a point will appear where you positioned your throttle stick, then simply press the "Rate" button and you will have completed adding the point.
To adjust the rate of any given point you must select the point, then press the "Rate" button and then use the up or down arrows to the right of the screen to adjust the point's rate. You can also use the double up and down arrows for larger increment adjustments.
All this seems a little confusing and might seem overly complicated but once you do it a few times you can actually start making custom curves in a flash.