Ar7000 channels.

[Wrench69]

Channels.

Quick newbie question. In Finless' vids he mentions the channels on the Futaba recievers but what do I plug in on a ar7000. He says pitch but as a newb I have no idea what channel on the reciever.

aux2 = Nothing
Aux1 = Pitch?
Gear = Gyro Gain?
Rudd = Rudder Servo/Gyro
Elev = Elevator
Aile = R Aileron
Thro = ESC

[TheBum]

You got it right (minus the question marks, of course).

[Wrench69]

Thank You.

? = Not sure :)

Question 2

For centering the servos I have Digital Hyperion Servos. Is it better to adjust them via the transmitter or using the software that for the PC. (Hyperion servo commander)

Question 3

Should I set the servos for a specific radio IE. JR, Futaba, Hitech, Multiplex, Or just plain standard?

[Pinecone]

If you can program the servos for center, I would do it that way.

[Wrench69]

Well after going over some of the other arms from the servo kit I found one that fits perfectly with out any problems.. They are all center perfect. I am very lucky or the servos are made like that.

I did reprogram the ailron servo to be reversed, so nothing on the radio has to be adjusted. I am very impressed with these Hyperion servos.. Digital Metal servos for 40 bucks that are programable is a very good deal plus the replacment gears are only like 9 dollars.