Sherpa FE
01-05-2008, 09:22 AM
T-rex 450 SE V 1.5 (Silver) remote control helicopter with the following upgrades
Align fiberglass canopy Dark blue & green
Revco perfect circle main gear,
Revco hardened steel motor pinion 11T,
Gorilla gear,
Gorilla paddles,
R. Lohr Plexi-glass gyro mount,
3 Hitec HS-65 metal gear servos,
Futaba 401 gyro,
JR DS 3400G Servo for tail, 1 broken mounting ear, but still works great.
Flight Leader aluminum carrying case with keys.
Tool box to tote all the other parts around
Includes 4 Li-Po batteries all have Dean Connectors:
2 FP EVO25 2170 mAh,
1 TP 2050 mAh,
1 TP 2100 mAh
Tools:
Align allen driver wrench set
TME’s The Xtrema Li-Po charger with computer cables, temp probe, and blinky balancer
Pro Peak 13.8V bench power supply
Metal century ball link set-up tool
Eflite blade pitch guage
Motor pinion puller
Ball link pliers
Spare parts:
1 carbon fiber fin set
1 gorilla gear set
1 blue main gear only
5 sets align 325 pro woodies red color 1 opened
1 set align C/F blades 325mm
4 Dean male/female connector sets and 2 male only plugs
2 tail rotor belts
2 sets tail boom braces (1 used)
2 aluminum canopy posts (both used)
18 long ball link clevises
5 short ball link clevises
approximately 30 stainless steel ball links
approximately 20 aluminum ball links
misc. servo link rods approximately 20
used 35 amp ESC
used 35 amp brushless motor
3 feathering shafts
4 tail rotor paddles
3 gorilla paddles
2 fly-bar shafts
Futaba S9650 servo (open, but never used)
3 Align battery Velcro straps
2 regular length tail booms
1 extra Align fiberglass canopy (dark blue/lime green)
There is over $1700 listed here, I am asking $1200.00 I will ship but I prefer not to. If you want it shipped I will ship to the US only, and buyer to pay shipping and any insurance if requested.
This is definitely a turn-key system, all you need to do is add your receiver and go fly.
Just a note, all servo and gyro wires were shortened to give a “clean install”
Any questions, E-mail me at rcflyer@earthlink.net (rcflyer@earthlink.net) I hardly check PM’s here.
Thanks for looking
Align fiberglass canopy Dark blue & green
Revco perfect circle main gear,
Revco hardened steel motor pinion 11T,
Gorilla gear,
Gorilla paddles,
R. Lohr Plexi-glass gyro mount,
3 Hitec HS-65 metal gear servos,
Futaba 401 gyro,
JR DS 3400G Servo for tail, 1 broken mounting ear, but still works great.
Flight Leader aluminum carrying case with keys.
Tool box to tote all the other parts around
Includes 4 Li-Po batteries all have Dean Connectors:
2 FP EVO25 2170 mAh,
1 TP 2050 mAh,
1 TP 2100 mAh
Tools:
Align allen driver wrench set
TME’s The Xtrema Li-Po charger with computer cables, temp probe, and blinky balancer
Pro Peak 13.8V bench power supply
Metal century ball link set-up tool
Eflite blade pitch guage
Motor pinion puller
Ball link pliers
Spare parts:
1 carbon fiber fin set
1 gorilla gear set
1 blue main gear only
5 sets align 325 pro woodies red color 1 opened
1 set align C/F blades 325mm
4 Dean male/female connector sets and 2 male only plugs
2 tail rotor belts
2 sets tail boom braces (1 used)
2 aluminum canopy posts (both used)
18 long ball link clevises
5 short ball link clevises
approximately 30 stainless steel ball links
approximately 20 aluminum ball links
misc. servo link rods approximately 20
used 35 amp ESC
used 35 amp brushless motor
3 feathering shafts
4 tail rotor paddles
3 gorilla paddles
2 fly-bar shafts
Futaba S9650 servo (open, but never used)
3 Align battery Velcro straps
2 regular length tail booms
1 extra Align fiberglass canopy (dark blue/lime green)
There is over $1700 listed here, I am asking $1200.00 I will ship but I prefer not to. If you want it shipped I will ship to the US only, and buyer to pay shipping and any insurance if requested.
This is definitely a turn-key system, all you need to do is add your receiver and go fly.
Just a note, all servo and gyro wires were shortened to give a “clean install”
Any questions, E-mail me at rcflyer@earthlink.net (rcflyer@earthlink.net) I hardly check PM’s here.
Thanks for looking