Different frames in t-rex 600 Nitro

[dadam1991]

Hi.
I have one question.
Why in standard align give diffrent frames?
I found 3 kind.
I dont have Opening show on photos.

1 kind of frame = doesnt have 2 openings
http://img230.imageshack.us/my.php?image=mojacd2.jpg

2 king of frame = has one opening
http://img88.imageshack.us/my.php?image=1dzsi7.jpg

3 kind of frame = has two openings
http://img88.imageshack.us/my.php?image=2dzivb5.jpg

This is only one difference ??

Thanks
Sorry for my English.
Adam.

[brgsstm]

I dont know why, but not having the top hole near the elevator arm is a pain in the ass! i had a nightmare getting the elevator arm level because of the lack of holes!

Tom

[OHIOBOWHUNTER]

I have a newer kit that has no holes,they are probably just revisions in they're manufacturing processes:thinking

[dadam1991]

I dont need this hole, but is that the only diference ??

[TRAMTRAN]

I ordered my in October 2007 and It's does not have a hole, it's a pain in the ass to get the elevator line up right. My opinion I think it's maybe align QC problem. I also had a friend bought the frame at the same time, and it's had a hole in the frame. I just ordered Rotorworks frame to replace my.

[dadam1991]

TRAMTRAN Whats pitch and cyclic do you have? You can +-14 with normal cyclic (7-8) ??
I think: with frames without holes pitch is smaller :( I and my friends dont have holes and my have only +-11 pitch and 7 cyclic. My second friend has holes and he has +-14 pitch and 9 cyclic

[TRAMTRAN]

that's right, my is only +-11 pitch and 7 cyclic. But I am replacing my with rotorworkz CF 2mm frame, and it's alot stiffer and much more precised cut compare to Align frame. I aslo install the G force to the bottom frame, My frame is a rock solid now. I also replace all stock screws, nuts and bolts with high quality carbon bought at Ace hardware. they are very good quality and not easily strip like the stock.