greasing TX sticks?

[StuLes]

Hi all
I have a JR9303, a few months old.
The thottle stick has a slight "slip/stick" feel to it. How do I make it silky smooth. I could slip a drop of oil between the sliding bits, or disassemble it and grease it with grease or graphite. Any suggestions.
Regards Stuart
Japan

[DavidH]

I would take the back off the radio and work on the mechanism that holds pressure against the movement of the stick. Usually this is all it takes. I do not think the bearings support the stick are the problem. It also may be there is some dirt or grit causing the problem.

David

[StuLes]

Thanks David, appreciated.

[StuLes]

Just opened up the back of the TX.
There is no friction adjuster on the throttle ...........
There are adjusters on ail/elv/rudd but not the throttle.
THe screw is there, but nothing attached to it lik on the other adjusters.
I have sent an email off to Horizon to see if this is a auality contol issue , or that is just the way the heli model TX is set up.
Seem odd to me. :dontknow