2.4 software update issue on 14mz

[toms]

I installed the new 2.4 update from the flyers club on my 14mz and set up 2 machines on 2.4 went out flying today and found when changing trim's in one machine they were changeing in the second machine I set up also.Just becareful when trimming one because they will change in the other.Hopefully in the next update this issue will be solved.I also tried a freinds radio and same problem

[jdonovan]

Must be a problem with just the 14mz i tried to recreate with my 12Z with the tm14 module. I originally setup my stratus with the 2.4 system let it do the channel reallocation. I setup a new model for the 600n im building and changed the trims and then changed back to my stratus and the trims were like they should be. I then selected a model I no longer have and changed it to the fasst multi, let it reallocate moved the trims. I went back to my stratus and they had not moved. So i guess this is a glitch with just the 14mz software.

[tkilwein]

I have the same trim bug on my 14MZ-2.4, I hope this is one of the SW improvments they are working on for next release. I have been pounding the P out of mine so far. I have over 3 hours of actual flight time and solid as a rock. Tested in two models so far and a third soon. I am going for 20 flight hours before the giant stuff. Today was a cold, windy,rain-snowy day of flying.
Looks like a 6014 backorder is in order for me shortly. HW is looking good so far for me. SW is maturing
as we see so far. This is expected from my point of view.

I wonder if the data port is similar to the spectrum data logger port? Have to wait and see.

Here is a thread I have started on my testing and in-flight experiences, three days-posts so far.

http://www.helifreak.com/showthread.php?t=55670

[MarkD]

In one respect this is why I'm glad that us in the UK don't get the modules for a few months after the USA

Let you let debug it and then we will have a fully working Tx :D

USA = Test Monkies :P