Blade CX2 servo arm outer holes

[MiniTitanRaptor]

Has anyone moved to the outer positions on their servo arms with the CX2.
Just wondering if there was any benefits.
Cheers.

[texaspablo]

Just bouhgt first heli week ago and is cx2. Been having problems woth it hovering. Took it to the hobby store and they recommended not moving to outer or inner postions but do as much adjusting by turing theServo pushrods.

[balbs]

Minititan, you can get longer throws for the swash so it can either go fore and aft or side to side faster.

texaspablo, when adjusting the rods, always make sure that the swash is level when at mid stick regardless of which hole you are using on the servo arms. Also, make sure the flybar link is adjusted so that the flybar is level with the top blades. If not, you can get the toilet bowl effect and the heli will want to swirl around in circles making it harder to hover.

Balbs

[carlo_the_wonder_frog]

Lots of folks have put the links on the outer holes. Mkaes the cx helis respond much faster as well as increasing speed. Detracts from the stability and it will wander more when hovering. Not recommended for noobs.