Can I use Futaba 6EXA with mCCPM?

[z_man_95]

Or is 6EXH still necessary?

[mporlier]

The non 2.4GHz 6EXA can not be used with a heli. No CCPM mixing, no gyro etc. Sorry

[h2xmark]

tower has the 6exp on sale ,

[BarracudaHockey]

The biggest drawback for a mechanical mix machine is you dont have pitch and throttle curves so you wont have the collective and throttle mixed automatically, you would be limited to simple linear mixes.

[AirmanBob]

Yes... you can use the 6EXA. Since the MX400 is mechanical mix
it will work just fine. The settings are in the back of your manual.

If you need a manual try Futaba's web site to downlload one.

AB

[Raven_darkcloud]

Ok just reviewed the manual from futaba's site and no it has no ccpm mixing. On a stock 400 it will work but not your ccpm one. Your best bet is to get a dx6 or the 6ex with fasst.

[z_man_95]

I thought it would work, hence "mechanical" mixing. The only concern I have is about the throttle. If you watch the x400 video, at the end it recommends the 6EXA.

[AirmanBob]

Whoops.........

I misread the transmitter model... I thought he said T6xa but he
said 6exa.

The 6exa won't work.

Sorry,
AB

[BarracudaHockey]

Yea thats what I said. :)

[AirmanBob]

Yeah...that's what you said...

[KITEPILOT]

I believe only the 450 came with ccpm so if thats what ya got and cant use your existing radio you can get a mx400 nonccpm upper frame....I own both the 400 and 450