tmry
01-09-2008, 04:39 PM
This package is for my TRex 450 SE setup. I've just lost interest in the hobby and the weather where I live really doesn't give you many good flying days. This package does not include any transmitter or reciever even if they appear in the pictures. I will ship all items in a single large box. Ground shipping and insurance is free to the 48. Asking $600 or make an offer if you feel that is too high. No trades please.
What is listed below is what is included:
The Helicopter: Align TRex 450 SE V1.5 with the stock Align 430L brushless motor.
The Electronics:
3 HS 65-HB micro servos on the collective
Futaba S6950 Digital servo on the tail
Futaba GY401 Gyro
This helicopter has several aftermarket upgrades:
Gorilla Landing Gear
Gorilla Programmable Paddles
Castle Creations Phoenix 45 Brushless Electronic Speed Controller
The Castle Link USB interface for programming the ESC is also included
Custom LED volt alarm to save those precious lipos.
Gates high performance tail rotor drive belt
Microheli 6950 custom tail shaft mounting braces
Microheli Gyro mount (to mount it below the body)
The Batteries: There are 5 batteries included in this package. Three have had some flights on them and two are new in the package.
Apex 15C 2100mAh Lipo
Two Thunder Power 2200mAh 25C Lipos
Two New in Package DN Power 2150mAh 20C Lipos
Align Balance Charger and appropriate adapters.
The Parts: I have spare parts of nearly everything that will break in a common crash:
4 sets of spare blades not counting the ones on the heli.
Align 325mm Pro woodies
Tech Model 335mm woodies (longer = slower head speed = more stable for beginners)
Align 315mm Fiber blades
Align 315 Carbon blades
Landing skids
Tail servo mounting brackets
Main shaft
Feathering shaft
Push rod
Flybar rods of different lengths
Tail blades
Two high strength main rotor gears
Extra tail rotor drive belt
Horizontal and vertical tail fins
Flybar paddles
Tail rotor shafts and bearings
Main rotor holder bearings
High performance main rotor standoffs
Additional different sized motor pinions
Lots of extra screws and ball link joints
PM me with any questions and have a great day!
What is listed below is what is included:
The Helicopter: Align TRex 450 SE V1.5 with the stock Align 430L brushless motor.
The Electronics:
3 HS 65-HB micro servos on the collective
Futaba S6950 Digital servo on the tail
Futaba GY401 Gyro
This helicopter has several aftermarket upgrades:
Gorilla Landing Gear
Gorilla Programmable Paddles
Castle Creations Phoenix 45 Brushless Electronic Speed Controller
The Castle Link USB interface for programming the ESC is also included
Custom LED volt alarm to save those precious lipos.
Gates high performance tail rotor drive belt
Microheli 6950 custom tail shaft mounting braces
Microheli Gyro mount (to mount it below the body)
The Batteries: There are 5 batteries included in this package. Three have had some flights on them and two are new in the package.
Apex 15C 2100mAh Lipo
Two Thunder Power 2200mAh 25C Lipos
Two New in Package DN Power 2150mAh 20C Lipos
Align Balance Charger and appropriate adapters.
The Parts: I have spare parts of nearly everything that will break in a common crash:
4 sets of spare blades not counting the ones on the heli.
Align 325mm Pro woodies
Tech Model 335mm woodies (longer = slower head speed = more stable for beginners)
Align 315mm Fiber blades
Align 315 Carbon blades
Landing skids
Tail servo mounting brackets
Main shaft
Feathering shaft
Push rod
Flybar rods of different lengths
Tail blades
Two high strength main rotor gears
Extra tail rotor drive belt
Horizontal and vertical tail fins
Flybar paddles
Tail rotor shafts and bearings
Main rotor holder bearings
High performance main rotor standoffs
Additional different sized motor pinions
Lots of extra screws and ball link joints
PM me with any questions and have a great day!