DX7+ Blade 400 setup help [Archive]

jetpilot

01-09-2008, 05:03 PM

Hi guys

Yesterday i read a post about setting, today i cant find it! anyone of you guys who use a DX7 can send me your setting i believe with the same servos and gyro it will be the same!

Thank you in advance

Luc

spencer737

01-11-2008, 04:40 PM

This is what set for my DX7 and Blade 400

Input Select: Gear = Gyro
Swash Type: 3 servos 120 degrees

Reversing: All norm except channels 4 and 6
Sub Trim: what ever in needed for center servos at center stick
Travel Adjust: 100% all around
Swash Mix: AILE +60 ELEV +60 Pit. +85
Throttle Hold: Pos. -5.0% Switch Rudd D/R
Throttle Curve Norm: 0, 50, 80, 90, 100
Throttle Curve ST1 & ST2: 100, 95, 90, 95, 100
Pitch Curve Norm: 40, 45, 50, 75, 100
Pitch Curve ST1, ST2 & Hold: 0, 25, 50, 75, 100
Gyro Sense: Auto Rate: 0:70% 1:71% F. Mode: Norm: 0 F STNT & Hold: 1
Timer: 4:30

Hope this helps!