Question on GForce Head

[Libelle]

Hallo,

I have got my GForce parts, on building the head I had a few problems:

1)
Can't use the TT see-saw hub on the GForce head?
It is possible to slide it on the GForce Head but I can't turn it 90° in its end position??
I dont want to file down the headpart!! Does the MH see-saw hub work without modification?

2)
The plastic see-saw hub has a little play in the GForce flybar cage, the same as I had in my plastic head....is that normal??

3)
Can't get the plastic blade grips to fit (to much play) the TT metal grips work perfect??? Why is there such a big difference?

Thanks
4ever

[chuckk]

there's such a big difference due to the fact that no two companies have any kind of standardization whatsoever. i just put on a tt metal hub and the two guide rods dont fit in the kasama washout base. they're spaced just a hair different. i had to drill the holes out a bit but it works fine. just like the kasama mixing levers don't work with a tt head, and so on and so on and so on.

its nothing but trial and error it seems.

[henrik04]

I think that if you buy the complete head either from G-force or Kasama, you won't have a problem.

Now if you buy only bits and pieces, you're looking for trouble that you will surely encounter..

I know that $100 is not nothing, but how much did you spend last time you "went out" ??

It's good that you go the 'metal way' don't forget to add the metal swash plate.. LOL

Happy flying.

[Libelle]

I think that if you buy the complete head either from G-force or Kasama, you won't have a problem.

I have the complet GForce parts but they do not offer a see-saw hub!

[henrik04]

That is a bit of a problem. Didn't know. Did you contact G-Force about it? Surely they should be able to help

.