boom slipping?

[djames]

Took the 500 out today and while doing some pirouettes, I heard a weird squeak only when spinning to the right I think (either way, it was only on one direction). Decided to tighten the belt and take it out again. Noise went away, but when I checked the belt tension after the flight, I found the belt was a lot looser than what I set it to. Anyone have problems with the boom slipping in the boom block?

[fogger]

There is a good chance of that as it's an Align signature problem. But also your belt is new and will stretch some for the first 50 or so flights...

[WiscHeli]

TT will be out in a month

[zsultan]

Will TT upgrade be included in the kits in a month? If so is it worth waiting for a month?

Thanks

[Finless]

Yep just like the 600 my belt is getting looser over a few flights because the boom is slipping in the tail boom clamp. One wrap of celo tape has solved it on my 450 and 600's so I am going to try it on the 500 as well.
When the TT is out if Align has not added a "pinning" screw to the tail case or boom clamp I will be drilling a hole in each and adding a screw.

Bob