gv-1 readings??????

[cmbheli]

Alright guys maybe someone can help me out.My sensor on my gv-1 was stuck on 86% when plugged in.Now when i unplug it its says 0%, so i went out and purchased a new sensor and the reading changes like it should but it never reads 0%? The lowest it reads is 3%.Any ideas?The unit does read 0% when the sensor is unplugged. Any help would be greatly appreciated

[Russ McC]

Hi Chris,

The first sensor was bad and the new one is ok, I don’t think mine ever read below 2, so if your reading 3 and then like 70 or better when the magnet passes then go try it, it will be fine :glasses:

[DavidH]

Chris,
As Russ mentioned. That is normal for the GV1.

David

[cmbheli]

Thanks guys, works fine :D