Power systems discussion

[clayboy]

it is a grate motor if you don`t want to do more then 60-100 flights with it. if you want to do more get something else

[dieselracer]

anyone using the meusa 1600kv motor Ron

great motor. Just use the heat sink for it and oil the bearings.

[eheliflyer]

I am using the Medusa -1600 and FP Evo 2500mm 6S and it never bogs even with hard collective moves.
IMHO the Medusa will out power any of the motors out there. And with the Cooling Finns the Medusa comes down just right. Packs are only warm to the touch. The Medusa is a bit heaver than the Scorpion but the power makes up the difference

[dieselracer]

I am using the Medusa -1600 and FP Evo 2500mm 6S and it never bogs even with hard collective moves.
IMHO the Medusa will out power any of the motors out there. And with the Cooling Finns the Medusa comes down just right. Packs are only warm to the touch. The Medusa is a bit heaver than the Scorpion but the power makes up the difference

Yep In power and flight time i would put the 3rd. It runs hot in hard 3D even with the heat sink. But has great power. It is heavyier but its a good motor.
My favorite in order.
#1 1706H 1.5y
#2 1905/1.5Y/F
#3 Medusa 1600
#4 600XL
#5 Scorpion 1400.

[Super D]

Hey Diesel! Where did you get a 1700 series motor? I cant find them anywhere!!

[dieselracer]

Hey Diesel! Where did you get a 1700 series motor? I cant find them anywhere!!

I got the first preproduction one. keep an eye out for it. Will be ready in the next few weeks.

[rcmarty]

diesel ..

what kv is this new neu ?

I've run the 1910 in my 600 , sweet motor.

I'm running the 500l on a ph80 right now , almost need earplugs in comaprison to the neu.

I assume 6s right ? Would evolite 2500 v2's get eaten up on this one ?

My only other neu option i can forsee is a 1907 on 8s.

Currnently i'm not all that hapy with my 500 (500l,ph80,13t,100%,evolite 3500's,mah430,stock paddles/tail,13 (or13.5i recall) pitch , 9-10 cyclic).

I think i'm gonig to throw a few $$ at it to have a hot little heli to play/learn on. Going to go with the v-bar and the mikado conversion.

Thanks

Martin

[dieselracer]

diesel ..

what kv is this new neu ?

I've run the 1910 in my 600 , sweet motor.

I'm running the 500l on a ph80 right now , almost need earplugs in comaprison to the neu.

I assume 6s right ? Would evolite 2500 v2's get eaten up on this one ?

My only other neu option i can forsee is a 1907 on 8s.

Currnently i'm not all that hapy with my 500 (500l,ph80,13t,100%,evolite 3500's,mah430,stock paddles/tail,13 (or13.5i recall) pitch , 9-10 cyclic).

I think i'm gonig to throw a few $$ at it to have a hot little heli to play/learn on. Going to go with the v-bar and the mikado conversion.

Thanks

Martin
The 1706's KV is 1250. I run it with a 16 tooth. The 1905 1.5y also runs very good on 6S on the 500.

[rcmarty]

Thanks diesel.

Do you think it's worth waiting for the 1706 ? Or is the 1905/1.5 as good ?

Looking for more performance over the stock motor, still using the 6s evolite v2's if possible.

Martin :)

[D.C]

anybody tried these batteries?

not a bad price.. if they work ok

http://www.miracle-mart.com/store/index.php?main_page=product_info&cPath=83_96_97&products_id=2430

[haha101]

i wouldnt trust that site dosent look legit but who noes

[jvthert]

I've ordered stuff there over a year ago: extreme blades for my coaxial heli... The shop is legit but I doubt the battery!

[epkencijus]

Hello guys,

I think put on the Trex 500 esp neu 1910H/1.5Y motor + jaz55 esc and 8S lipo.

How much need capacity on the lipo and how much I`m get min per one flight?

P.s. I want ~ 6 min.
P.s.s. One guy tell to me: 8S 2100mah, Neu 1910 1.5Y, Jazz55 NOTHING can outpower thathttp://www.runryder.com/img/smilies/biggrin.gifhttp://www.runryder.com/img/smilies/biggrin.gifhttp://www.runryder.com/img/smilies/biggrin.gif 7min of unreal power.
Really?

P.s. What battery the best? (6s or 8s or 10s +? capacity mhA and C?)
What engine the best?
What ESC the best?

I want more power http://www.runryder.com/img/smilies/wink.gif

P.s. On the Trex 450se I have Scorpion 2221-8 motor + Castle Creations 45 ESC and runing with 3S 2150 mA 25C lipo. I`m geting 4 min. hard 3D flight. Power = wonderful! After flight battery capacity left about ~ 17-20 percent.

Sory for my langure and spelling. http://www.runryder.com/img/smilies/rolleyes.gif

Thanks for answer. :noteworthy :hug:

Evaldas

[aussiemick]

I am using 2 4S Outrage 2200's on mine with a Medusa 32-50-1300V2 and the jazz 55-10-32 and it gives me great power for a 6minute flight.
I am looking forward to seeing what comes out in the 17XX range from neu. I would love to lose some of the extra weight that the medusa introduces.

mick

[epkencijus]

To aussiemick (http://www.helifreak.com/member.php?u=11181):

Maybe You have flight videos?
Which pinion you useing?
What weight you bird?
You Outrage lipo`s 25C?

Thanks for answers. :cheers
Evaldas.

[aussiemick]

no flights videos (no one willing to get that close)
I am running a 12 tooth pinion.
My heli weighs in at just over 1900grams (and it doesnt have a flybar)
yes 25C Outrage.

I see the Neu 1706 is ready http://www.helifreak.com/showpost.php?p=985193&postcount=71
Mick

[epkencijus]

Where I can buy this motor (Medusa 32-50-1300V2)?

Thanks.
Evaldas
:Bow

[aussiemick]

Where I can buy this motor (Medusa 32-50-1300V2)?

Thanks.
Evaldas
:Bow

I will sell you mine now that i see the NEu is out. :)

or if that doesnt suit, http://www.medusaproducts.com/motors/036-V2.htm

Mick

[epkencijus]

This motor? http://www.helidirect.com/product_info.php?products_id=8025

Evaldas. :noteworthy

[aussiemick]

No you will need one with a 5mm shaft. Unless of course you can find pinions suitable with a 1/8" (3.18mm) bore.

Mick

[epkencijus]

I read about NEU 1706H/1.5y This motor made for 6S lipo.
How You think I can use on the 8S?

Video with 6S lipo: http://www.youtube.com/watch?v=xYC55hYdh8Q

And also wath you think about 1910H/1.5Y and 1907H/1.5Y motors with 8S setup?

Evaldas.