2.4 back to 35/40MHz

[jetblast]

Do you need to change the firmware back.....Or will it run both, if you wanted to change the module back to 35/40MHz

Thanks

[DavidH]

If you have updated the software to the 2.4ghz. You can swap back and forth between 2.4ghz - 35,40,mhz. Or what ever your transmitter was using.

You just have to be aware that the 2.4ghz allows you an option to reassign the channel grouping. That grouping is different than the current mhz G3 . So when you swap the modules, just be aware of which grouping to choose. It will ask you when you install the 35 mhz if you want to go back to the G3 grouping.

David