Extended boom

[andrebandre]

Does anyone know a different source for the long boom beside Readyheli?
I woke up too late and they are out of stock.

[Tmblewd]

You can try this

World Wide Sales and Support:
sales@rc-tek.com

According to RC-TEK USA Sales

The boom is part number SJUP 5001 and it is $12.00 usd

The belt is part number SJUP 5002 and it is $7.47 usd

[andrebandre]

Thx Tmblewd, i already emailed them but all i got was a reply asking me in what country i live and nothing else.Not much hope there.

[Tmblewd]

Try this:

http://www.rc-tek.com/us_store/index.php?target=forms&name=contact_us

[rotodingo]

Does anyone know a different source for the long boom beside Readyheli?
I woke up too late and they are out of stock.

Hello Victor,

Maybe you can use Hirobo long boom 0304-071 (500mm) and belt 2504-030.
Respectively 4500Y and 1500Y. You will have a 30% discount by ordering it to RC Champ in Japan. You have to send them an e-mail. Very simple. You will be contacted by Masa.

Nicolas

[Rush]

whats wrong with the original boom length? Just wondering what the advantage of a longer boom would be for the lepton.

Try REady heli.. they have extended boom parts n the site. Fins, belts, Boom. I'm just not sure what it does for the heli though...

Regards

[balbs]

Some people say that the Lepton tail is pretty weak (as far as handling goes especially on certain 3D maneuvers). A longer tail boom will give it better tail authority. A longer boom will give the tail better leverage and require less power to swing the heli around.

Balbs

[Rush]

Wouldnt the 68mm blades be a cheaper option? I hear those fix the weak tail issue.

Looking at the Lepton stock blades, these are the size of the Trex 450 tail blades. I'm getting the 68mm's.

Another option i've heard of is to use the K&B 30/50 blades (85mm) and cut them down to 70mms.

Regards

[rotodingo]

The idea behind hirobo parts release is to have a bigger heli. It's a stretch kit initially with also longer blades (465mm instead of 425).

[andrebandre]

Hello Victor,

Maybe you can use Hirobo long boom 0304-071 (500mm) and belt 2504-030.
Respectively 4500Y and 1500Y. You will have a 30% discount by ordering it to RC Champ in Japan. You have to send them an e-mail. Very simple. You will be contacted by Masa.

Nicolas

I'm way ahead of you Nicolas.I followed your suggestion from the thread in wich someone was asking for spare parts in general (cheap too if possible) and i contacted RC Champ and they got me covered.
It's the second break i get from you.Encore un fois, merci..

Victor the Macho Camacho

[andrebandre]

Hello Victor,

Maybe you can use Hirobo long boom 0304-071 (500mm) and belt 2504-030.
Respectively 4500Y and 1500Y. You will have a 30% discount by ordering it to RC Champ in Japan. You have to send them an e-mail. Very simple. You will be contacted by Masa.

Nicolas

I'm way ahead of you Nicolas.I followed your suggestion from the thread in wich someone was asking for spare parts in general (cheap too if possible) and i contacted RC Champ and they got me covered.
It's the second break i get from you.Encore un fois, merci..

Victor the Macho Camacho

[Rush]

The idea behind hirobo parts release is to have a bigger heli. It's a stretch kit initially with also longer blades (465mm instead of 425).

Hows the performance with the extended setup? Any better? Someon have a vid of it?