Tail blade sizes for Logo500?

[BruceW]

Currently I'm running the K&B 85mm tail blades but thinking about upgrading to CF since I get some chatter in high torque maneuvers. I really like the K&B blades for price and visibility but figure its time to experiment.

The chord on the K&B looks wider than most others so I figure the next set should be a little longer.

Would 95mm V-blades or 92mm CY be a good choice?

[OICU812]

I run CY 92mm Radix they work well, as do 90mm MAH blades. As long as you are running stiff main blades and running the #3092 dampers in the headblock you can safely get away with 95mm Vblades I am told. Both Tom and Max Kruzeberger use 95mm Vblade tails. I find the authority is more than satisfactory however with the 92mm Radix tails. And I do find they work better than the K&B for certain, to much flex on the K&Bs, in fact I don't like their blades other than the small t-rex sized ones. Flamesuit on as I know Bobby loves those K&Bs'! LOL :flamesuit

[npap]

Hi,

Is it possible to use 95 V blades with Maniac blades 553? i would like to buy Vblades but not sure if there could be interfere.

Thanks for your help

Norbert - FRANCE