Esky Li-Po and TP210 – what adaptors required?

[fury]

Hi,

I already ready have the TP1010 and TP210 and would like to know what adaptor I need to make the battery pictured below fit my balancer:

http://img.photobucket.com/albums/v414/Fury20/CIMG0689.jpg

http://img.photobucket.com/albums/v414/Fury20/CIMG0688.jpg

The battery is from Esky co-axial Lama as pictured below.

http://img.photobucket.com/albums/v414/Fury20/esky_lamav3-300.jpg

Many thanks

[gww528]

contact http://www.rclipos.com/ they are very knowledgeable and helpful

[charlieh]

You have to get align to TP adaptor - item# AL-TP-2S from http://www.rclipos.com/

[papa.alpha]

CommonSenseRC.com has them. Be really careful of the polarity. You may need the reversing adapter. It looks from the photo like the ground is on the opposite end of the plug from the TP balancer ground. They are dirt cheap so get both and you'll be set.

[gww528]

CommonSenseRC.com has them. Be really careful of the polarity. You may need the reversing adapter. It looks from the photo like the ground is on the opposite end of the plug from the TP balancer ground. They are dirt cheap so get both and you'll be set.

This is all you need.

You have to get align to TP adaptor - item# AL-TP-2S from http://www.rclipos.com/

[papa-alpha]

GWW528

Good site. I hadn't seen it before and a lot closer to me.

Thanks,

pa

[fury]

Thanks ever so much guys :thumbup: