Gaui Hurricane 550 Weight

[BobOD]

Can anybody confirm the weight of this heli...well equiped?

Please include setup.

Thanks.

[jnngill]

Flying weight is 4 pounds 3 1/3 ounces.

[mjdee14]

4 lbs even with 2500 poly's

4lb 3 oz with 3300 poly's

this includes weight of eagletree v2 plus monitor.

airtronics styd servos, gy401, 515 cf blade, mostly metal head, Z20 980kv motor, 1320 mah tp rec batt.

[Phoinix]

Hurricane @ 5350 5S,
BEC 2S 800,
Eagle tree complete sensor layout
CF 550 blades
ALU LiPo bracket
_____________________________

2650g (5,83 lbs)

[Mikej]

Bob,

Mine ways 1738grams without batteries but with Trex 600 u/c, Futaba 146iP Rx, but no lipos as they vary depending on the size - my Kong Powers weigh 206 grams each the A-Plus's 2200 25C weigh 180 grams each.

Therefore weight with 2 x KP = 2150 grams, 4lbs 11oz
or with 2 x A-Plus = 2098grams, 4lbs 10oz

Cheers,
Mike.

[BobOD]

4 lbs even with 2500 poly's

4lb 3 oz with 3300 poly's

this includes weight of eagletree v2 plus monitor.

airtronics styd servos, gy401, 515 cf blade, mostly metal head, Z20 980kv motor, 1320 mah tp rec batt.

4lb 3 oz? That's 1903 grams. Assuming a 6s3300 battery is 515 grams, that means your at 1388 grams without the battery.
MikeJ is at 1738g without the battery and without the eagletree I presume.

How do you account for the difference?

[mjdee14]

I must have measured wrong the first time....I had a problem balancing the heli on the scale. This time I used a platform and zeroed out the tare wt.

Empty wt is 4lbs 1852 g
2500's wt 14.8 oz 424 g

3300's wt 1lb 3oz 544 g

so my max wt with the 3300 is "5lbs 3 oz" 2396g
2500's 4lbs 14.8 oz 2276 g

Sorry for the mistake.....that seems to be more in line with others and is much more accurate the way I weighed it this time.

Mike

[Mikej]

Bob,

Unfortunately it is without an Eagletree as I don't have one yet :lol:

The weight (1738 grams) is fully built with Futaba R146iP rx, Dimension SportBEC, Gaui 50 amp ESC, Gaui 850Kv motor, 3 x 3001 on cyclic and 3151 on the tail with a Telebee gyro, it is with short boom and 500mm main blades and CNC pitch, aileron and elevator levers, plastic main frames.

With 2 x KP 2200's it weighs in at 2150 grams.

Cheers,
Mike.

[BobOD]

I must have measured wrong the first time....I had a problem balancing the heli on the scale. This time I used a platform and zeroed out the tare wt.

Empty wt is 4lbs 1852 g
2500's wt 14.8 oz 424 g

3300's wt 1lb 3oz 544 g

so my max wt with the 3300 is "5lbs 3 oz" 2396g
2500's 4lbs 14.8 oz 2276 g

Sorry for the mistake.....that seems to be more in line with others and is much more accurate the way I weighed it this time.

Mike

Ah, that looks much better. Thanks.

Mike...get the Eagletree...you'le love it! ;)

[Mikej]

It looks as if my 550 needs to go on a diet :thumbdown::thumbdown: I know that part of this is down to the Trex U/C, and I have just bought a DX7 so putting the AR7000 in should help also. Then I can put some of the weight back on with the Eagletree :):)

[ianjh123]

Readyheli CF frame
All cnc head (except seesaw)
Trex cnc tail (complete)
CF 500 blades
plastic canopy
Trex 3D landing gear (heavy)
Trex carbon tail supports
Quark 65 esc (heavy)
Z-power z-30 (heavy)
JR RS77S RX
gy401 gyro + 9254 tail servo
3 x futaba 9650 servos on cyclic
5A BEC
total weight 1840g

6s 4100 lipo (hextronic) 640g

---flying weight 2480g---