Foxden
01-20-2008, 11:09 PM
This was just released from the owner of RJX Hobby...!!! on an AUS forum.
Hello @ll
thankīs for your great comments.
For the questions on the E-Kit:
on 8S can be used a 670KV motor and lipos with at least 4500mAh and 20C.
for 10-12S a 470KV motor with 3700 to 4000mAh with 15C.
The frame wide is 32mm.I have seen packs from TP that fits perfectly in between.
The heli in grey CF weights in 3500g with a 8S 5000mAh.Flight time is about 9+ minutes with this pack
We have motors and ESC in our productline for the kits.Ask Toby at TOAL. In the US talk to Rusty at RJXofUSA
For the X-TREME 90:
Some details of it are .....
Full metal head and adjustable like on the X50 (with some more holes that you not get borring)
4mm and 5mm Flybar posibility
Belt and TT (without any adjustments needed) tail system
complete metal tail and thrust bearings in tail grips
CCPM Push pull system on same axis for true mixing
Metal fan
90T and 93T helical main gears included in the kits for OS and YS engines
RJX 90 Size Muffler for OS and YS in the kits
this are some more details from the X90.The prototype weights in fully equiped with:
3x 9451,1xJR8300(throttle),GV1,GY601+9256,BEC,2100mAh lipos,OS91SZ,RJX90 Muffler,RJX 700mm CF mains and 103mm tail blades
4400g RTF without fuel
I will post more specs and picīs soon
At the shelfs from your dealers in less than 4 month
As Toby told allready it is in the pipeline.Testings so far are going very well and impresive.
Phil will be soon here and make the test on his ouwn way.(wink)
@ Toby: I have prepared the video cam and my pants
Best Regards to all
Frank- RJX HOBBY
Hello @ll
thankīs for your great comments.
For the questions on the E-Kit:
on 8S can be used a 670KV motor and lipos with at least 4500mAh and 20C.
for 10-12S a 470KV motor with 3700 to 4000mAh with 15C.
The frame wide is 32mm.I have seen packs from TP that fits perfectly in between.
The heli in grey CF weights in 3500g with a 8S 5000mAh.Flight time is about 9+ minutes with this pack
We have motors and ESC in our productline for the kits.Ask Toby at TOAL. In the US talk to Rusty at RJXofUSA
For the X-TREME 90:
Some details of it are .....
Full metal head and adjustable like on the X50 (with some more holes that you not get borring)
4mm and 5mm Flybar posibility
Belt and TT (without any adjustments needed) tail system
complete metal tail and thrust bearings in tail grips
CCPM Push pull system on same axis for true mixing
Metal fan
90T and 93T helical main gears included in the kits for OS and YS engines
RJX 90 Size Muffler for OS and YS in the kits
this are some more details from the X90.The prototype weights in fully equiped with:
3x 9451,1xJR8300(throttle),GV1,GY601+9256,BEC,2100mAh lipos,OS91SZ,RJX90 Muffler,RJX 700mm CF mains and 103mm tail blades
4400g RTF without fuel
I will post more specs and picīs soon
At the shelfs from your dealers in less than 4 month
As Toby told allready it is in the pipeline.Testings so far are going very well and impresive.
Phil will be soon here and make the test on his ouwn way.(wink)
@ Toby: I have prepared the video cam and my pants
Best Regards to all
Frank- RJX HOBBY