PDA

View Full Version : Esky Gryo Behavior


Buz Killington
01-21-2008, 10:32 AM
Hello all im looking for some thoughts.

i flew last night about 25* out and towards the end of the flight (hovering) the tail switched mid flight. ie. move the stick to the right, tail goes left then while panning left it will stop and go back to the right with no change in the inputs:confused: Almost like right was left and left was right.

I thought that it might be the cold. Its the stock gryo on the Belt CP and it has never done this before. I did check all connections and rev. switches on the Tx and everything is as it should be.

any help apperciated!

Buz

neo187i
02-13-2008, 08:29 AM
tempreture drasticly affects gyro behavoir epecially stock ones invest in a good gyro which has tempreture resisting qualitys and you won't go far wrong.

damyxz
02-13-2008, 12:53 PM
Just leave the heli ouside for about 15 min before flying. The stock gyro needs to be temp stabilized especially if you are taking it from a warm place to a cold place or vice versa. These gyros do not have a temp stabilizing circuit like the 401's and the 2100t's.