Failsafe - DX7

[Mathias]

Hi!

If you program the failsafe with the stick at the bottom and in normal mode. If you are in idle up and the receiver resets, will the motor stop like in normal mode with the stick at the bottom? Or will it reset in idle up and the stick at the bottom and full negative pitch?

Thanks

[fogger]

Failsafe on the 7000 goes to "last known good position" on all channels except throttle, which goes to whatever the throttle curve was being output at during binding. So, if you bound with throttle stick at bottom with a curve that has zero throttle at that stick position, your failsafe is zero throttle.

Hope that answers your question...

-Fog

[Mathias]

Failsafe on the 7000...Does that count with the AR6200 to?

Thanks

[fogger]

I believe it is all of the spektrum rx's perhaps with the exception of the 9 channel versions which I am unfamiliar with...

-Fog

[frebou]

Same thing for the AR9000 version.

You also have another way of binding, in which you plug the bind plug AFTER having connecter power to receiver. This way, the receiver does not remember last known position but return to predefined position at bind time. At least for the 9 ch receiver that came with my 9303

[Mathias]

OK, thank you guys!