bdelmo
01-21-2008, 07:03 PM
I am a new volunteer at the American Helicopter Museum http://www.helicoptermuseum.org. where I found an older model of the Hirobo Aerospatiale SA 315B Lama (6/99 donation) in storage. I would be grateful to find a source for an electric file with the manual of this helicopter, which is needed for me, along with other staff at AHM, to restore it to flying condition, if possible.
This 30 size Lama has a OS glo engine, Futaba Rx FP-R4F Mode II, Futaba gyro FP-G151 (1984 discontinued), three Futaba 1C FP-57 servos and one Futaba 1C FP-57L servo (servos were not found at Futaba web site). It is missing one servo for tail blades pitch, has wood blades with blade grips and is also missing any grip attachment, except two holes for spindle below the fly rods.
I obtained a part listing from Jeff Green based on the above description, but no manual. It would greatly help to have the 30 Lama manual with parts explosion to figure this out for restoration.
This 30 size Lama has a OS glo engine, Futaba Rx FP-R4F Mode II, Futaba gyro FP-G151 (1984 discontinued), three Futaba 1C FP-57 servos and one Futaba 1C FP-57L servo (servos were not found at Futaba web site). It is missing one servo for tail blades pitch, has wood blades with blade grips and is also missing any grip attachment, except two holes for spindle below the fly rods.
I obtained a part listing from Jeff Green based on the above description, but no manual. It would greatly help to have the 30 Lama manual with parts explosion to figure this out for restoration.