RX pack for Freya evo 90

[JiriK]

I bought some A123 1100mAh cells for my MiniTitan, but that 5S config wasn´t as powerful as I had hoped..
So, now I wonder if these cells could be used to power receiver and servos of my Freya.

1100mAh capacity isn´t enough, so I need connect at least 2 parallel.. Or maybe more, comments?
Alternative is to use 2300mAh cells, but what kind of pack should it be, 2S1P or 2S2P.

Adding cells parallel would add some protection against cell failure..

[Jafa]

It's rare for RX batteries to fail - I don't think parallel configurations provide protection

What you need to look at is weight - over 200 grams and you're carrying too much
It's hard to beat a 4 or 5 cell 4/5 A size rated at 2000mah~2500mah
This pack configuration on the tonque balances the Freya nicely

[JiriK]

2S 2300mAh pack weights 166g and a regulator weights maybe 35g...
Some have used those cells without regulator but I will use one.

So fast charge 2000mAh pack for 200g.. Should be ok?

[Jafa]

Should be fine

Charge rate = 2300mah