Align TREX 600N NEW/MINT ARF ALL METAL UPGRADES

[B-ONE]

For sale a MINT/NEW CONDITION ARF ALIGN TREX 600N (NITRO VERSION). This Heli was recently /professionally built, engine broke in and tested. It has a gallon of fuel through it. Assembly was very thorough and detailed. Please note in pictures that the servos wires were fitted with black braided sheath. Items included in sale are:
TREX 600N, Align Red Painted Canopy, OS 50 Hyper, Align muffler, Align 2 in 1 BEC,
Align 7.4 1900mah Lipo,(3 X ) 8717 JR Servos !!!, (1X) 9256 Futaba Servo for Tail,
(1X) DS821 Servo for Throttle, Curtis Youngblood Solid G Gyro, Curtis Youngblood ATG, Curtis Youngblood 600mm CF Blades, V Blades for Tail, Align CF Paddles, Align METAL Blade Grips, Align METAL Flybar Seesaw holder, Align METAL Rotor head Upgrade, Align METAL Mixing Arms, Align METAL Elevator Lever, Align METAL Aileron Levers, Align METAL Main Shaft Bearing Blocks, Align Metal Tail Control Arm,
Align JR Servo Horn Set and Align Optional Gyro Mount. I believe all the metal upgrades have been installed? Did we miss any? Just add your receiver and transmitter.

THE XPS RECEIVER ON THE HELI IS NOT INCLUDED IN THE AUCTION.
THERE IS APPROXIMATELY $2300.00 IN COMPONENTS ALONE IN THIS HELI MINUS THE BUILD COSTS. Will sell for $1800.00 plus shipping/ins.

[B-ONE]

Pictures of tail on the torque tube and gyro

[Bobbyk]

Thats one sweet looking bird!

Robert

[B-ONE]

Thanks!

[B-ONE]

Last call, $1650.00 plus shipping.

[time2burn]

What's wrong with it? Why are you selling it?

[Rototerrier]

I am actually pricing out everything for a new Nitro Pro. I wish I could purchase yours but you are asking way too much. I understand you want to get the most out of your investment, but heli values drop faster than SUV's when they drive off the lot. If you would consider more of a used price I would seriously consider...but as of now, I am still going new.

One question, is this the Nitro Pro kit? It looks like it is.

Just to let you know what my current research has turned up. I am looking at 1450 for the Pro Kit with motor/muffler/bec combo, 3 high speed high torque futaba servos, gy401, Align Governor. And a few other extras.

That's 200 less than your price used. I understand you havn't flown it much and to you it is still new...but it is officially "used". Even if your bird has 200 more worth of stuff built into it, there is still the used factor that has not been completely accounted for. I wouldn't expect to pay more than a new one would cost me.

I totally mean no disrespect, just sharing my research and hoping for a dialog....I just might buy if the price is right.

[B-ONE]

1. Add all the metal upgrades and see what the calculator shows. Yes, they are new, not a scratch on them. Actually, I had this heli for sale minus the metal upgrades and recently decided to add them. Did you check out the difference in price on a 401 vs the solid "G" gyro? The "G" has way more adjustability for the 3d enthusiast. Did you figure in the cost of a decent tail servo? Iam using a 9256 (abt $110.00)
Did you add the cost of both main and tail blades? In the "few other extras" you will need a total of 5 servos. In my radio restoration business, labor is a factor. I know after you build one of these, and build it right, you start to appreciate the number of hours that goes into building and setup, and yes, time is money!

I hope you find what you are looking for. I can vouch that Align makes a great heli. Just keep checking this and other forums, the one you like will come along.

2. There is nothing wrong with the heli. Iam pursuing other hobbies which are also expensive.

[Rototerrier]

I completely understand, I can never sell mine for top dollar either. I just take the hit and move to the next project...I was hoping you were willing to do the same. I am in the boat where if I always have to give mine away, I only come out even if I can buy from those who have to do the same. Otherwise I spend 2k, sell for 800 and then turn back around and spend 2k. Doesn't work out well like that.

I put my HDX up for 900 after paying 1800 and the best offer I could get was 500. No one wants to pay top dollar for used helis...It must be that they don't actually trust the stated condition.

I trust your condition, I just can't afford to pay top dollar when I can't sell what I have for top dollar.

Good luck on the sale. I will keep up with this post, it will be a couple weeks before I make my final move.

...oh, and to answer your questions...yes to all. This wouldn't be my first heli...just my first nitro. Getting tired of charging.

[Hulley]

Watching......Still too much...good lookin bird though!

[Lota Fun R]

I see it is on Ebay, Reserve not met. I bid on it.

Let me know how it works out. :smokin:

[Rototerrier]

I gave it a shot for what I was willing to pay. 1350 + 67 shipping...I hate I missed the mark. Must be a high reserve. Someone will step up and meet it.

[B-ONE]

No longer available. Thanks for the feedback.

[Hulley]

Great lookin bird and very well equip, I'm sure the new owner will be very happy!

[Lota Fun R]

It IS available on Ebay.


up to 1450. w00t.

Thanks anyways.
:smokin:

[stevenzx10]

holey crap u bumped your head thinking you will get that much when ther is a lot nicer for less on ebay you can get one for 1400 wit 611 and a ton of spare parts. U are asking way to much. maybe 1000:arggg: