Al Magaloff
05-21-2005, 05:49 AM
For Sale: A custom Raptor 90, that I assembled from a new 60 kit. All parts and equipment are brand new, unfired never seen fuel, with the exception of the V-Blades. They have a couple of flights on them. Equipment included with the machine: TT carbon frames, TT carbon lower plate,680 V1 V-blades, painted white, 95mm V-paddles,Arizona Helis glass canopy painted dark orange to yellow fade.Full QUK rotorhead, including:R6H-02 head block, Rick's O-ring mod installed,R6H-07 flybar control arms, R6H-03 flybar control yoke,R6H-08 blade grips. TT PV0290 washout with blue arms,TT blue swashplate, TT upper and lower blue main bearing blocks,TT hardened mainshaft,Aluminum elevator "A" arms with RocketCity links,8.27 gearing,90 size clutch bell with my custom liner material, QUK HD clutch R6D-11,TT metal YS fan with magnet installed. YS91 motor, Boca ceramic bearings installed, MP2 ,OSI ViperHead, two Enya 3's , lit by two TT remote glow adapters. 9252 cyclic servos, 9151 pitch servo, TT pitch servo output support kit, 9253 throttle servo, Throttle Jockey Pro with optical sensor,TT Push/pull elevator upgrade,Sanyo 1700ma NiCad pack from ElectroDynamics, with two leads, GY401 with 9250 servo,QUK tail servo mount/carbon pushrod/horizontal fin mount and pushrod guide/support. TT carbon fins,arrowshaft torque tube, long TT aluminum tailboom,TT carbon boom supports,Vario Super landing gear, receiver and battery mount in StrongBox, Super Rocker switch, DynoMite fuel filter, every fastener upgraded to grade 10.9 and 12.9 socket head cap screws and button heads. All bearings greased with The Greaser during build. RocketCity links on all pushrods. Completely new, unfired, never seen fuel. $3030 total expenditure. Selling for $1750 firm plus shipping. JR receiver ( R649 or R900) (new) could be part of the deal for another $100, PayPal will cost you another 3%. Not looking for trades at this time. PM me with e-mail address for pictures. Thanks for looking.